paper making machine(recycled paper )

Brand:aa

Product detail:

 1092mm tissue paper Machine

.Technical parameters:

1. Output paper style: high& medium grade tissue paper;

2. Raw material: recycle paper;

3. Output paper weight: 16-40g/m²;

4. net paper width: 1092mm;

5.Width of cylinder mould: 1450mm;

6.Capacity: 2T/D;

7 Rail gauge:1880mm;

8 Drive way: AC inverter speed

.structure of main part:

1.Cylinder section:1000mm×1450mm stainless steel cylinder mould 1set, 380mm×1450mm couch roll 1set, it is coated by rubber ,rubber hardness HSD 38±2.

2.Dryer section: 2000mm×1450mm alloy dryer can 1set, 350mm×1450mm touch roll 1 set,it is coated by rubber, Rubber hardness HSD 90±2, dryer can is equipped with double layer exhaust hood of dryer can, mechanical pressure device.

3. Winding section: 1092mm rewinding & perforating machine and paper cutting machine.

.All Equipments:

NO.	item	quantity(set)
1	1092mm tissue paper making machine	1
2	double layer Exhausted hood of dryer can	1
3	Φ700mm axial-flow ventilator	1
4	Model-33 Roots vacuum pump	1
5	1092mm winding machine	1
6	1092mm rewinding &perforating machine	1
7	1092mm paper cutting machine	1
8	Suction box	1
9	3m3high consistency hydrapulper	1
10	0.9m2High frequency vibration screen	1
11	Φ380mm double disc pulp refiner	1
12	35m3bleacher	2
13	Φ700mmThruster	4
14	606sand remover 3 pcs	1group
15	4 inch pulp pump	4
16	1ton boiler(burn coal)	1

 

.all accessory electric motor:

NO.	item	powerkw	grade	quantity(set)
1	1092mm tissue paper making machine	11	adjustable speed motor	1
2	Φ700mm axial-flow ventilator	4	4	1
3	1092mm rewinding &perforating machine	3	adjustable speed motor	1
4	1092mm paper cutting machine	2.2	4	1
5	model 33 roots vacuum pump	5.5	4	1
6	3m3high consistency hydrapulper	37	6	1
7	0.9m2high frequency vibration screen	3	4	1
8	Φ380mm double disc refiner	37	4	1
9	35m3bleacher	3	4	2
10	Φ700mm thruster	11	6	4
11	4inch pulp pump	5	4	4
12	1ton boiler(burn coal)	5.5	4	2

.perfect service:

(1)technical consultation ;

(2)detailed design of factory ;

(3)installing and testing the whole production line;

(4)training engineers and workers;

(5)supplying spare part for long time;