TL clay roof tile press machine / 008615896531755

Brand:aa

Product detail:

  TL clay roof tile press machine

 

Introduction

Newly designed cement/concrete roof tile machine adopts PLS programmable controller featuring fast moulding speed,large output automatic control,manmachine interface,reliable performance and convenient operation,it has 8 p/m,whole hydropneumatic production speed,high ratio of finished products and high cost performance.

 

 Features

 This equipment adopt advanced technology. It has better mechanism capability and economic benefic.

1. Fast forming speed,high production. Four-Post Type Tile Making Machine features PLC automic control, man-machine interface and dependable performance.

     

2. After the mortar is plastically rolled,the concrete tiles thus fabricated features in perfect, various style,high density, high intensity and accurate size, so that they can meet the needs of different constructions.they are best among concrete products 

    

3. One machine can be used for multiple purposes.by changing the moulds, the equipment can produce various styles of main tiles,ridge tiles,edge tiles and ditch tiles.Also it can produce different styles of high grade concrete floor tiles and wash tiles simultaneously.

 

 

Features 

 

1.unique water-proof structure

 

Only the tile shaped by Pressure filtration style mould can make tile valley bottom structure, which could make the  rainwater  fall  more  smoothly  and  quickly.  And it could  avoid the  countercurrent which might be arisen by common concrete tile shaped by Rolling type molding.

 

2.easy to construct

 

The vertical and horizontal laying construction are both convenient and feasible. 

 

3.strong wind resistance

 

It makes snap-in slopes in the  roof which develops the roof to be a tight unit.

 

4.good heat protection 

 

The test shows the temperature of the tile surface is 71.4 Fahrenheit(21.89 centigrade) in the 

hottest three months.

 

5.freezing-thawing resisting

 

It meets the JIS Standards. 

 

6.permeability resistance

 

 

Technological  Parameter

Model	MYWJ-125
Overall Dimension	3120×1750×2650 mm
Moulding Cycle	8-10 s
Moulding Pressure	1250 KN
Weight of Main Engine	5.5 t
Equipped Capacitor	5.5 kw
Production Capacity	3800-4000 pcs/day
Tile Size	424×377 mm

 

Molding    speed	Mold of operation	Host motor	voltage	factory	Number	Color tile specifications	Class production	Total power
8/minute	Full-automatic	7.5KW	380V	10*16.5m	4-5person	424×337mm	3500-4000 piece	17KW

 

The Consist of machine

 

1.molding tile forming machine 

2.wheel agitator

3.automatic weighing and feeding machine

4.bucket elevator

5.steel tile holder