2013 New Customized automatic rani juice processing

Brand:aa

Product detail:

 

 

1) About water production line

 

1:Principle of the small bottle water production line

 

We produce a complete production line including water treatment, water cleaner, labeling machine, plastic injection machine, blow moulding machine and shrink-wrapping packing machine. The bottle's size can be decided by client.

 

2:Application

 

This production line can fill mineral water, beer,carbonated drinking, juice and so on.

 

2).3-in-1 yellow wine machine. filling washing capping machine discription

 

HGX series mono-block filler/ROPP capper is suitable for yellow wine bottling. This series of machine are special designed for wine that required hot-filling. Low vacuum filling technology is utilized, and level correction mechanism is also equipped. The speed is from 5000 – 18000 BPH (500 ml glass bottles)

This machine is a filling and capping integrated machine after many years manufacture experience in the company combining with the development of wine industry chara cteristics,mainly use for the wine filling at high temperature or room temperature,combining with instantaneous UHT ultra-high temperature stenilization system to automatically cycle work.This machine is designed scientifically and ogically,the system is perfect,The operation and maintenance are convenience,a high degree of automatic.It can also also be used for other non-gas heverage bottles,filling and capping at capping at high-temperature or room temperature.

3.other related equipment:

 

A.De-palletizer

B.bottle rinsing

C.Cap elevator

 

The series of products is mainly include the caterpillar,wind and magnetic cap-conveying machines,respectively applied for the plastic security caps,aluminum security capl,skull caps.This machine mainly conveys the caps from a lower place into the hopper of the cap-screwing machine at a higher position,an anxiliary equipment for the capping machine.

D.CIP systems

CIP system is used to clean the inside of filling tanks, pipes, valves, etc. It is normally used for juice filling, carbonated soft drink filling, and sometimes, for water filling. The CIP systems is consists of clean liquid tanks, heat exchange plates, that are used to heat the water by steam, and pumps to recycling the clean solution inside the filling tanks and pipes.? We have manual operated CIP systems, Semi-automatic CIP systems, 2 tanks CIP systems and 3 tanks CIP systems.

 

E.Bttle outside rinsing machine

F.Bottle cooling tunner

G.Date Coder

H.Pressure-less conveyor buffer

I.Blow dryer

J.Labelling machine

K.Plastic film wrap shrinking or carton packing

H.Electric control systems

I.Clean room

 

Clean Room is used to accommodate the filling machine. The clean room builds a clean environment to prevent the beverage from contamination during filling. Filter clean air is applied from the roof down to the filling machine to generate a positive pressure on the filling area, and there are also boot washing and air blow cleaning at the entrance of the Clean Room.

 

 

 

 

 

 

4) Specifications

 

1: Data of machine: rani juice processing

Item	Rising heads	Filling heads	Capping heads	Capacity	Used rising wate	Main water power	Out size(mm)	Packing size(mm)
1	16	12	6	2000-4000	0.8 T/h	2.2 KW	2350x1610x2250	2365x1625x2270
2	16	16	6	3000-5000	0.8 T/h	2.2 KW	2350x1750x2250	2365x1765x2270
3	18	18	6	3000-6000	1.2 T/h	3.0 KW	2480x1960x2250	2495x1975x2270
4	24	24	8	6000-9000	1.2 T/h	3.0 KW	3010x2180x2400	3035x2195x2420
5	32	32	10	10000-12000	1.5 T/h	4.0 KW	4000x2200x2500	4030x2220x2530

 

2: Certifications

 

 

 

5) About our company

 

Jiangmen Pengjiang Angel Drinking Water Equipment Co.,ltd. is a professional manufacture of liquid packaging equipment. The company is located in Jiangmen, a small city around 80 KM away from Guangzhou Baiyun international Airport. We were established in 1996, and now it has around 180 employees, including 30 experienced engineers, 30,000 M2 modern workshop, and around 1,000 customers scattered in all over the world, including the U.S.A, Canada, Japan, U.K, CIS countries, Middle East, Africa, South East Asia, etc.

 

 

We are an ISO 9001:2000 certified company. All raw materials and components are from the first class reliable suppliers. Such as Siemens PLC and Touch Screen, SEW motors, Camozz pneumatic components and Schneider electric components. We pay great attention to every step in the manufacturing, and that guarantee the final quality of the equipment.

 

 

 

 

      

 

  6. Thank you for visiting JM-Angel Please tell us your suggestions, we will reply you timely