the hydraulic induction heating elbow making machine

Type

hydraulic adjustable elbow making machine

Material

Elbow machine,Pipe expanding machine,Pipe bending machine,plate benging machine,Press machine,Elbow bender two functions machine and so on.

Size

from 25mmto630mm(diameter)

Time of delivery

According to the customer requirement

Packaging Detail

wooden crate or nothing

The min order

1 set

Specifications

1.Hydraulic propulsion

2. Medium-frequency heating

3. Automatic feeding

Max OD

mm

ID of    cylinder

mm

Pole of diameter

mm

Quantities of  cylinder (pc)

Max pushing force (T)

Using pushing   force (T)

Power of Medium Frequency

kw

108

125

90

2

40

35

100

159

140

100

2

50

43

160

219

160

120

2

66

56

250

325

180

140

2

83

71

300

426

220

185

2

125

107

350

529

250

185

2

161

138

400

630

280

210

2

203

174

400

720

300

210

2

233

199

500

820

320

230

2

265

227

600

1020

300

210

4

466

399

700

1220

320

230

4

530

454

800

1420

360

250

4

671

575

The Main Technical Parameters of The Pipe Bending Machine

1, Master cylinder: inside diameter: effective strock:12m the max thrust of the 2 cylinders 210T.

The other smaller cylinders: 125mm 2 pieces.

2, Hydraulic pump station

   a,station configuration:   25scy plunger pump 1 set , 7.5KW Motor 1 set ( to converse frequency

adjust the speed of the master pump)

   PV2R13-17-116 gear pump 1 set ,15KW Motor 1 set ( fast forwad and backward,to guide clamp wheel,fixture motor).

   The working speed ; 0-20cm/min , the maxmum backward speed:300cm/min

3,The guiding part of the main machine is controled by four wheels, the clamp holding different size run

   By the hydraulic motor, it open and closed drived by the oil cylinder, the oil cylinder drive the the rocking arm to adjust the bending radius.

4,Medium—frequency power supply:600 KW, 500-1000HZ.

   The total power of the machinery part: 25KW,380V or 220V,50HZ or 60 HZ

5,Assembly parts

   a,clamp wheels (four for the round pipe and four for the square pipe),fixture made of 45# cast steel

   b,master fuselage,weldment,the main pushing board are welded board

   c,screw,chain,standard parts and bearing are national standards

   d,the guider is dovetail groove slide plate mode

   e, The effective length of the bending radius adjust device is 30m (the part in the groun and the turning arm)

6,PLC (Siemens)

    Angle setting show,distance and speed setting show,temperature show,with memory storage function,the bending angle sensed from the encoder,the terminal showed by the touch screen,During bending, computer records bending status at all times,Put the angle degree via the touch screen.With the infrared thermometer. The data and image of whole process can be stored and printed..

The works and the scope of supply of the supplier

1. Design and manufacture Φ762 pipe bending machine

2. Guide to install the equipment as the equipment arrives at the factory of buyer

3. Debugging and test run the equipment

4. Main machine part, hydraulic pump station.

5. fixture (clamps device):

A for square pipe :300X300mm and 400X400mm , 1 piece for each.

B for round pipe:

6. Spindle for the turning arm : 2 pieces.

7. PLC device (Siemens):1 set.

8. The heeting device:

M-frequency ark: 1 set 600KW

The capacitor 1 set

The electric reactor 1 set

Water cooling cable 3mX2 pieces

Quenching transformer 3000KVA 1 set.

Induction heating coils:

A for square pipe :300X300mm and 400X400mm , 2 pieces for each.

B for round pipe:    1 piece for each size.

9. The equipment foundation drawing, hydraulic principle drawing, electrical diagram, machical drawing, manual operating instruction and the software back up for PLC, 1 coppy for each.

10. Send 2 engineer and 1 English speaker to the buyers factory to install and commiission the machine, It would take 20 days, based on the buyer get everything ready for the installation and commission before the technicians and after the machine get to the the buyers factor.The buyer supply the board and lodging during the term. If it takes more days for the buyer’s factor, the buyer would pay 25 USD for per person per day for the beyond.

11. The parts and the tools go with the machine, ( the list following)