KB-125E/600 Excellent quality concrete roof tile machine

Brand:aa

Product detail:

 

KB-125E/600 Excellent quality concrete roof tile machine

 

 

Concrete roof tile machine/ roof tile machine / tile machine

 

The production line KBJX KB-125C Hot Sale Concrete Roof Tile Machine is automatically controlled and easy to operate, so it just need 3-5 individuals to do the job.

 

There is no special need for the structure KB-125C Hot Sale Concrete Roof Tile Machine for sale tiles ; as long as the squre up to 150m2, and the height is no lower than 4m. the factory plot need't too large, but the outside field must be large enough for stacking the large qty. 

 

The whole production line KB-125C Hot Sale Concrete Roof Tile Machine  for the roof tiles -- 

capacity: 22.2 kw (pls see to that, not an usage in the meantime)

motor power of main equipment 5.5kw + motor power of constant feeder system 1.5kw + motor power of blender 5.5 kw + motor power of elevating conveyor 2.2 kw + motor power of the air compressing machine 7.5kw)

 

The electric vlotage and grequency: AC-380V/50HZ

 

The whole production line KB-125C Hot Sale Concrete Roof Tile Machine  for the floor tiles  ---

catacity: 30.5 kw (pls see to that, not an usage in the meantime)

motor power of main equipment 5.5 kw + motoer power of constant feeder system 1.5kw + motor power of blender 5.5 kw + motor power of elevating conveyor 2.2lw + automatic polishing machine: 15.8kw.

 

 

Equipment type	KB-125E/600
moulding speed	5-6pcs/min
main frame power	7.5kw
main frame weight	8T
external dimension	3460*1830*2750mm

 

 

 

  

1. Advantage of  KB-125E/600 Concrete Roof Tile Machine

  

1). Its merits includes the high forming rapid, the high output, the PLC automatic control, the reliable  performance, the comvenient operation, the fully hydropneumatic driving, the high producing speed of 8 pcs/min, the high rate of finished products, and the excellent performace- price ratio. 

  

2). It's made of cement sand stone debris chemical color, formed by pressed, with the nice shape, various type, great stability and exact sizes.

  

3).It's multifunctional. By changing the mould, it could be used to produce paving slabs Blind way brickParking lot of bricklawn brick , etc.

 

 

 

 

 

2. A whole set production line of  KB-125E/600 Concrete Roof Tile Machine

 

 

 1. Moulding

Water will be got rid of during production, the pressure should be over 100tons((The pressure gauge indicates over 13MPa) and the pressing time should not be less than 3 seconds.

Change the filter net on lower mould in time, usually 2~3 times each shift. If water polluted and muddy, then filter net should be changed, otherwise tile’s quality will be affected.

  

2. Curing

Generally, wet tiles should be naturally cured 24 hours on the pallets, and humidity and temperature should be controlled at the same time. Take away pallets when tile surface solid, water tiles everyday in the first week, and water amount subject to humidity. It’s better to put tile in vertical way and 28- day curing time is needed before on sale

   

3. Color Painting

    Color is painted after tile completely dried and dusted (water moisture content not over 2%). First painting for bottom layer with temperature range 50°C~60°C, after dried then paint the surface layer.

 

 

 

 

3. Details equipments, (mixer, elevator, feeder,  module...) of  KB-125E/600 Concrete Roof Tile Machine

 

1	Moulding machine (KB-125E)	1 set
2	constant feeder machine	1 set
3	blender	1 set
4	elevator machine	1 set
5	air compressor	1 set
6	polishing machine	1 set
7	stacker machine	1 set

 

 

  

 

4. Multi-functional products which  KB-125E/600 Concrete Roof Tile Machine makes

 

roof tiles, main tile, margin tile, ridge tile....etc

 

 

 floor tiles if change module, terrazzo floor tiles

 

 

 

 

 

 

 

 

for details information,pls feel free to contact me about following information: