KB-125E/400 automatic concrete floor tile making equipment

Brand:aa

Product detail:

 

KB-125E/400 automatic concrete floor tile making equipment      

 

 

 concrete floor tile machine

 floor tile machine

PLC control, Chint magnetic valve, hydropneumatic, effiency

 

Raw materials	Specification	Ratio(kg)	Notes
Cement	P.O or P.S 32.5#	50
Sand	Medium sand,Mx=2.3~3.0	80~100	≤dia 5mm
Additive	Water-reducing agent	0.5~1.0	optional

 

1)Its with the merits of fast molding speed, large output, reliable performance, PLC automatic control and convenient operation. Its hydropneumatic, with the speed as high as 7-8 pieces/min. 3000-3500pcs/shift=8hours per day. In addition, the rate of finished products is high, and the quality-price-relative is better.

 

2)The cement-tiles made of the mortar concrete with press-filtering molding are with the perfect structure. In addtion, there are many kinds available, with high density, strong intensity, and nice dimensions, which are the excellent on the concrete products, meeting the different construction requirements.

 

3)The machine is with multi - functional. By changing molds, it could be used to produce master tile, ridge tile, edge tile, drain-tile, etc. In addition, it could also be used to product various top-grade colorful ground tile, including terrazzo tile, bathing tile, etc.

 

4)Our KB-125E/400 concrete floor tile making equipment also can produce terrazzo tiles size no more than 400*400mm. Very profitable for customers.

 

 

 

 

 

 

 

 

 advantage mainly performance of KB-125E/400 concrete floor tile making equipment

 

1) Unique W aterproof Structure

 Only the finished tile molded by press filtering is with the unique bottom structure, which could drain the rain smoothly and rapidly, and avoid the adverse current resulted from the common cement-tile molded by press rolling. In addition, the tile molded by press filtering is also with the higher part on the head to keep water off. Therefore, there would be no adverse current even on the horizontal roof.

  

2)Extra Intensity

 Finished Colorful-Tile Its molded by the upper and lower molds, with the nice shape. The surface is smooth and even, with the precise dimensions and even density. Especially, the rupture strength over 200kg makes it possible for the constructors to walk on the roof.

  

3)Convenient Construction 

Its convenient and available for vertical laying or horizontal laying. On the common sloping roof, its allowed not to use batten. In addition, its also very convenient for cutting machine to cut at any angle.

 

4)Extra Wind Resistance

The colorful tiles are connected closely on the inclined plane and slope, which makes the roof compacting.

  

5)Excellent Heat-Shielding Performance

 

At the Japanese Solar Energy Research Center, its tested that the average temperate on the inner surface of the roof with colorful-tiles and the battens is 74.1 (21.89), which decreases the load of air conditions greatly, with the better heat-shielding performance than other tiles.

 

moulding presure	125T
moulding speed	7-pcs/min,more than 3000pcs/shift
main frame power	5.5 KW
main frame weight	about 5T
external dimension	2700*1600*2480mm

 

  

 

production process of KB-125E/400 concrete floor tile making equipment, the whole production line of  KB-125E/400 will help customer better understand our machine

 

 

1. Moulding

Water will be got rid of during production, the pressure should be over 100tons((The pressure gauge indicates over 13MPa) and the pressing time should not be less than 3 seconds.

Change the filter net on lower mould in time, usually 2~3 times each shift. If water polluted and muddy, then filter net should be changed, otherwise tile’s quality will be affected.

  

2. Curing

Generally, wet tiles should be naturally cured 24 hours on the pallets, and humidity and temperature should be controlled at the same time. Take away pallets when tile surface solid, water tiles everyday in the first week, and water amount subject to humidity. It’s better to put tile in vertical way and 28- day curing time is needed before on sale

   

3. Color Painting

  Color is painted after tile completely dried and dusted (water moisture content not over 2%). First painting for bottom layer with temperature range 50°C~60°C, after dried then paint the surface layer.

 

 

 

 

details equipments of KB-125E/400 concrete floor tile making equipment (such as mixer, elevator, feeder, forming machine,...) 

 

 

 

 

our KB-125E/400 concrete floor tile making equipment makes terrazzo floor tiles,  also KB-125E/400 also makes roof tiles, such as main roof tile, ridge tile, margin tile, end tile..., 

 

 

 

 

  

 

 

 

 

 

 

for details information, pls feel free to contact with me of following, welcome to visit our factory if have time: