Fly Ash Rotary Dryer/ Fly Ash Grinding device/ Professional Fly Ash Dryer, Mobile: 0086-15038396015

Brand:aa

Product detail:

Good Quality Rotary Kiln and Dryer from Manufacturer, Mobile: 0086-15038396015 :( welcome to China)

 

Introduction of rotary dryer:

Rotary dryer is a drying device, widely used in mining equipment. It can be divided into two categories, direct and indirect heat transfer drum dryers.

Structure of rotary dryer:

In order to increase the mterial evenly distributed in the rotor parts of the cross section in good contact with the drying medium, in the cylinder body installation raise plates. There are several types of raise plate.

1). lifting type: For large or easy to bond the material in the tube wall.

2).Four formats type: Suitable for big density, not crisp or not easily scattered materials. The raise plate will be divided into four panes, and were mutually connected fan-shaped workout room, Materials and the contact surface of the hot gas than large of the lifting type, and also can increase of the filling material rate and reduce material landing height and reduce dust quantity loss and so on.

3).Cross-shaped or frame-shaped: applicable to brittle and easy dispersion small pieces of material, make the material can be evenly dispersed in cylinder whole section.

4).Sleeve type: For double entry Heat transfer for the double (or half the diameter heating) rotary drum dryer raise plate.

5).Separate format (fan): For very fine particles and the material prone to flying powder. materials accumulate on grid board when it into, then cylinder rotates, the material is turning and continue contacts with the hot gases, at the same time, the decrease of height landing, reducing the dry material being gas away possibility.

The main technical parameters of rotary dryer:

type	gradient(%)	rotation rate(r/min)	enter the air temperature degree(°C)	Power(kw)	Efficiency(t/h)	Weight(t)
Φ600×6000	3-5	3-8	≤700	3	0.5-1.5	2.9
Φ800×8000	3-5	3-8	≤700	4	0.8-2.0	3.5
Φ800×10000	3-5	3-8	≤700	4	0.8-2.5	4.5
Φ1000×10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
Φ1200×10000	3-5	3-8	≤700	7.5	1.8-5	14.5
Φ1200×12000	3-5	3-8	≤700	11	2-6	14.8
Φ1500×12000	3-5	2-6	≤800	15	3.5-9	17.8
Φ1800×12000	3-5	2-6	≤800	18	5-12	25
Φ2200×12000	3-5	1.5-6	≤800	18.5	6-15	33
Φ2200×18000	3-5	1.5-6	≤800	22	10-18	53.8
Φ220020000	3-5	1.5-6	≤800	30	12-20	56
Φ2400×200001	3-5	1.5-5	≤800	37	18-30	60
Φ3000×20000	3-5	1.5-5	≤800	55	25-35	78
Φ3000×25000	3-5	1.5-5	≤800	75	32-40	104.9

About Us: