Click for original picture
Brand:aa
Product detail:
Technical Parameters (some depend on the final design) | ||
1 | Style | C120-300 |
2 | Machine dimension (mm) | 9500*1500*1200 |
3 | Total wight (Kg) | 8500 |
4 | Forming steps | 12 |
5 | Forming speed (m/min) | Approx.10 |
6 | Hydraulic station power(Kw) | 11 |
7 | Diameter of shaft (mm) | 75 |
8 | Hydraulic pressure(MPa) | 18-20 |
9 | Electric condition | 380V/3Phase/ 50HZ |
10 | Power for hydraulic decoiler(Kw) | 2.5 and 3 |
11 | Decoiler max capacity (Kgs) | 100000 |
12 | Control system | PLC |
13 | Raw material thickness (mm) | 1.5-3.0 |
14 | Effective width(mm) | 120-300 |
15 | Material width(mm) | 192-495 |
16 | Serial number | A2011002 |
Product Line:
Uncoiler-Entry bench-Roll forming machine-Punching&Cutting device-PLC control system-Product rack
Components of Machine and Main Description | ||
| Components of Machine | Main Description |
1 | Automatic hydraulic uncoiler(according the machine and your requirement) | 1.Loading Capacity:Max:5 Tons |
2.Main motor:3 KW | ||
3.Coil Width:Max:1250mm | ||
2 | Entry Bench | Guiding the raw material into the roll forming machine smoothly |
3 | Feeding Section with guide | Easily for the raw material entry |
4 | Main forming machine | Forming the panel according your requirement |
5 | PLC control system | Automatically control the quantity of sheet, cutting length, step length |
6 | Cutting blade | Cutting the panel automatically |
7 | Product Rack | Can adjustable according the length of the panel (3 units) |
8 | Pressing device | Pressing the panel automatically |
9 | Mesh cover above roll former(optional) | Avoid hand go inside the forming machine |
Feature: |
1. Cutter Material: Cr12MoV1 mould steel with heat treatment |
2. Shaft Material: Cr12 mould steel with heat treatment |
3. Roller Material:40Gr mould steel with heat treatment, hard Chrome Coated |
4. Delivery time:30% deposit and balance before delivery |
5. This product line to produce C-purlin with pre-punching and pre-cutting |
6. Widely used in various industrial, factory, villa building, civilian building, warehouse and have features such as nice appearance and durable |
7. We can manufacture various kinds of machines to satisfy our customer, you can also provided the drawings what you want or the samples, we will design the project for you accordingly |
After-sale Service:
1. In correct operation & maintaining, one year guarantee for the machine after leaving our factory.
2. If installation is needed, we will dispatch our technician to your company to assist install the machine freely, you need to pay for the roundtrip air ticket and the local accommodation.
