Auto Transponder T300 Key Programmer

Functions It is the latest version, which is 9.2, add more cars than old version.

Use for key programming. More cars than any other transponder machine . Package contains

1.for HODA Adaptor

2.SUZUKI Adaptor

3.MITSUBISHI Adaptor

4.OBDII-16 Adaptor

5.OBDII-16 POWER Adaptor

6.AUDI 2+2 Adaptor

7.for HODA-3 Adaptor

8.LIGHTER Adaptor

9.MAIN UNIT Adaptor

Workable Models

ACURA AUDI ALFA CHEVROLET CITROEN CHRYSLER/DODGE/JEEP DAEWOO FORD FORD(USA) FIAT GENERAL MOTORS GM HOLDEN for HODA HYUNDAI ISUZU INFINNITI JAGUAR KIA LAND ROVER LANCIA LEXUS LINICOLN MAZDA(USA) MERCURY MITSUBISHI NISSAN PEUGEOT RENAULT ROVER SEAT SKODA SUZUKI TOYOTA TOYOTA(US ) VW VW/AUDI PIN CODE READ

AUDI-VW Transponder key matching with 5 digits Login Code

Procedure for adding transponder keys to vehicles with separate Immobilizer box:

(Audi to year 97, Golf 3, Passat B4, Transporter, Lupo, Sharan)

Switch ignition ON with new key. Select: Immobilizer -> Login Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code). For example, if your Login is 1234, enter 01234. Save Go to Adaptation Enter 01 in "Channel Number" Enter The "Stored Value" is the number of keys currently matched. Enter number corresponding to the total number of keys to be matched, - for ex 2 ; Enter -> Save Switch ignition off and remove key Insert next key to ignition and switch ignition on again Wait 15 sec. Repeat this step with each key until all keys have been matched. Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation Enter 00 in "Channel Number" Enter 0 and Save. This will learn ECU with Immobiliser.

Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster: (Audi from year 97, Golf 4, Passat B5, B6 )

Switch ignition ON with new key. Select: Instrument -> Login Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code). For example, if your Login is 1234, enter 01234. Save Go to Adaptation Enter 21 in "Channel Number" Enter The "Stored Value" is the number of keys currently matched. Enter number corresponding to the total number of keys to be matched, - for ex 2 ; Enter -> Save Switch ignition off and remove key Insert next key to ignition and switch ignition on again Wait 15 sec. Repeat this step with each key until all keys have been matched. Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation Enter 00 in "Channel Number" Enter 0 and Save. This will learn ECU with Immobiliser