New arrived !key cutting machine GL-303B

Product Description:

Multi-Functional key clamp can be used to commodate flat dimple key & snake/profile cutting keys like kaba, keso & benz. 
New type micro adjusting scale can help the adjusting work more precise. 
Horizontal action lever can make the cross plate which is with ball bearing to be moved smoothly & easily. 
Special designed tracer spring can make tracer have spring property to aim at the hole firstly, then cut so it help user to avoid any miss-cutting. 
While make the snake/profile cut key, suer can lock both the vertical action lever & tracer spring set to fix your cutting depth. 
Cross plate intelligent control knob is special designed for slotting cut & snake/profile cuts. Lock it, there will have a spring property to lean against the edge of cut area automatically. 
Attached adaptors can be fixed on the clamp for duplicating 7 pins standard tubular key (outer diameter 9.6 mm & inner diameter 7.85/7.9mm).

Model: GL-303B
Exclusive system with synchronized tiling axis permits clamp to be slanted gradually and progressively to any angle between 0 to 45 clockwise & counter-clockwise.
The property is very useful for perfect duplication of keys with angular cuts.

Actual dimensions: 
23x52x31 cm

Net weight: 18kgs
Gross weight with carton: 26kgs
Measurement: 4 Cubic Feet
Power supply: 220V(110V,240V)60/50Hz

Synchronous tilt design expertise with key hole inclined plane

1. Tilt axis with a unique synchronization system, Ke Yi necessary, in the clockwise and counterclockwise rotation between the free and fixed at 0 ~ 45 degree angle between any. Copy the plane applicable to the key holes are inclined, such as: KABA, KESO.

2. Special equipment point of display, with the fixture rotation, precisely at the point of showing it. a new depth of characterization button can help users fine-tune the calibration more accurate.

3. Block shake grip level group the flexibility to operate, with ball bearing slide cross slide to move the fixture level is easy.

4. Special prospective design with the flexibility to pre-drill the correct location to find only after the cutting tool, can increase the accuracy of drilling. copy the key, such as Benz Key serpentine grooves, can be quasi-vertical activities with spring handle and lock button fixed to fixed the depth of cut.

5. Cross slide intelligent controls, is particularly snake-like and grooves for copying the design of the keys, locking the control button, next to the master key grooves, will have the flexibility of automatically by the role model.

6. Motor Speed can be adjusted according to demand an appropriate tool speed. high accuracy, save hours of work, increase efficiency.

7. Exclusive system with synchronized tilting axis permits clamp to be slanted gradually and progressively to any anglebetween 0 to 45 clockwise & counter-clockwise. The property is very useful for perfect duplication of keys with angular cuts.

8. The pitch angle indicator can show you the cutting angle precisely.

9. New type micro adjusting scale can help the adjusting work more precise.

10. Horizontal action lever can make the cross plate which is with ball bearing to be moved smoothly & easily.

11. Special designed tracer spring can make tracer have spring property to aim at the hole firstly, then cut so it help user toavoid any miss-cutting.

12. While make the snake/profile cut key, user can lock both the vertical action lever & tracer spring set to fix your cutting depth.

13. Cross plate intelligent control knob is special designed for slotting cut & snake/profile cuts. Lock it, there will have a springproperty to lean against the edge of cut area automatically.

14. The speed adjusting knob, you can adjust the cutters R.P.M. upon your requirement.

15.Hight precise, times save & hight efficiency.