D2,JP54,MAZUT,AGO

Product detail:SPECIFICATION RUSSIAN DIESEL OIL D2 L0.2/62 GOST 305-82Russian Origin Gas Oil L0.2/62 GOST 305-82Specification:Density at 15 degree C KG/L:0.82-0.867Colour, ASTM:2.0 maxSulfur, % Mass:0.20 maxFlash Point, degree C:60 minKinematic at 40 deg. C cst:1.70 -5.5Pour Point, deg C:10 maxDistillation Temp, deg C:370 maxASH, % Mass:0.02 maxConradson Carbon Residue % Mass:0.35 maxCetane Index Calculated:48 minWater & Sediment % Vol:.10 maxQuantity: Buyer OptionOrigin: CIS-RussiaPayment: To be disscused - 100 top prime bankInspection: STANDARD GAS SPECIFICATION or equivalent * JP54 - RUSSIAN ORIGIN AVIATION KEROSENE JET FUEL COLONIAL GRADE 54 ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA-3 mg/l max 1 adis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy net mj/kg min 18.4 D4808 Smoke point mm min 19 D1322 Luminomitter number min 45 D1740 Naphtalenes % vol max 3 D18403 PROPERTY UNIT MIN-MAX RESULT TEST-IP METHOD Composition Total Acidity mg KOH/g max 0.01 354 D3242 Aromatics % vol max 22.0 158 D1318 Sulphur, Total % mass max 0.30 107 D1266/2622 Doctor, test % mass max 0.003 30 D4952 VOLATILITY Initial Boiling Point Centigrade max Report 123 D96 10% vol at C 240 20% vol at C Report 50% vol at C Report 80% vol at C Report End point Centigrade max 300 Recovered ridicules 1.5 Loss 1.5 Flesh Point Centigrade max 42 170/303 Density at 15 C Kg/m2 min/max 776/840 180/385 D1298 LOW TEMPERATURES PROPERTIES Freezing Point Centigrade max -40 15 D2256 CORROSION Corrosion, copper (2hrs at 100C) max 1 154 D130 sion, silver (4hrs at 50C) max 1 227 STABILITY Thermal stability control, Temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max <3 CONTAMINATIONS Existent Gum mg/100ml max 7 131 D361 Water reacoin, interface rating max 16 258 D1084 Fuel with static dissipater additives min 75 D3648 Fuel without static dissipater additive min HEAVY FUEL OIL / MAZUT M100 (GOST 10585/75)COMPONENTS RESULTS Ash content, max % 0,14 Mass fraction of sulphur, max % low sulphur residual oil 0,5 Temperature of the flash: - in the closed crucible, not less C > 65- In the open crucible , not less C > 110 The temperature of solidification, not higher C 25 Kinematics viscosity 118 max Water content 0.5% Mechanical impurities Lower than 0.1% Acidity Lower than 0.5 KOH / 100 ml Alkalinity Nil Gross Calorific Value Kcal/kg / KJ/kg Min 9700 / 41300 Density at 15.0 C Kg/l 0.8900 - 0.9200 Hydrogen Sulfide Content (H2S) ppm 0.5 max Carbon Residual Lower than 7% Vanadium (V) ppm 23 Aluminum (Al) ppm 5 Silicon (SI) ppm 12 Nickel (Ni) ppm 29 Asphaltenes m/m 3.6 Distillation @4 mm Hg -Extracted to 760 mm Hg -Initial Boiling Point C 216 5% recovered C 259 10% recovered C 310 20% recovered C 358 30% recovered C 445 40% recovered C 502 50% recovered C 534 60% recovered C 538 75% recovered C 545 80% recovered C -90% recovered C -Final Boiling point C 550 Percent Recovered vol. 78% Residue vol. 22% Total Nitrogen m/m 0.192% Sodium (Na) ppm 15