60 Celsius Normal Close Thermostat Temperature Control Switch KSD301

60 Celsius Normal Close Thermostat Temperature Control Switch KSD301 1.Specification: 3.Structure & Application:(1)The KSD 301 series thermostat is a fully closed temperature relay with a shell sensing the temperature by contact with the double sheet metals. (2)It enables two contacts to move quickly for the purpose of switching on or off the circuit through the principle that the disc sheet metal deforms under action of temperature and jumps instantaneously at such point of temperature in combination with the mechanical action. 4.The Detail Of The Product:1. The KSD 301 series thermostat is a fully closed temperature relay with a shell sensing the temperature by contact with the double sheet metals. 2. It enables two contacts to move quickly for the purpose of switching on or off the circuit through the principle that the disc sheet metal deforms under action of temperature and jumps instantaneously at such point of temperature in combination with the mechanical action. 3.This KSD301 thermostat is used either as temperature control and safety limit for household electric appliances and widely applicable for coffee maker, water heater, immersion heaters, electric cookers, microwave ovens, automatic toasters, etc.5.Pay Attention:(1) With the installation of the contact temperature, you should make the metal covering against accused of equipment installation and in order to ensure the thermal effect, you should coat with thermal conductivity silicone grease, or other similar heat-conducting medium temperate sensing surface.(2) Installation can not cover the top of the surface collapsed , loose or deformed , so as not to affect performance .(3) Not allow the liquid to penetrate the temperature inside , not allow the shell cracks , and not allow free to change the shape of the external terminals .(4) Not greater than 5A current circuit, the products should be selected the Copper conductor cross-section 0 5-1 mm 2 wire connection; Not greater than 10A current circuit should be selected the Copper conductor cross-section 0.75-1.5 mm 2 wire connection ;(5) Products should be stored at less than 90% relative humidity , ambient temperature below 40 °C ventilation, clean, dry , non-corrosive gases warehouse.If you can cooperate with us, we will be honored and you will benefit from:1. - Your client satisfied on the right schedule and quality.2. - Your can get good reputation from your market and obtain more orders.3. - Our professional service before and after sale.4. - The reasonable price.5. - Any questions from you are welcome and will be replied in 24 hours.