20PCS/Lot Sle4442 with Hi_Co Magstripe 2 in 1 Contact Smart Blank Memory Chip Card Printable By Z

Brand Name:

OEM

Model Number:

SLE4442+Magstripe 2 in 1 cards

Chip:

SLE4442+Magstripe 2 in 1 cards

data retention:

> 10 years

The minimum write / erase time:

2.5ms

Temperature range:

0 - 70

implementation of standards:

ISO 14443, ISO 7816

Endurance:

> 100,000

Dimensions:

85.5x54x0.80 ± 0.04mm

Place of Origin:

Guangdong, China (Mainland)

Product Description 20PCS/Lot  Sle4442 with  Hi_Co Magstripe 2 in 1 Contact Smart  Blank Memory Chip Card Printable By Zebar Card Printer The baby Show:     First, the key indicators:

256 bytes of EEPROM organized

32-bit protected memory composition  3-byte user password, the password error count: 3
Temperature range: 0 - 70

erase at least 10 million

at least 10 years data retention
The minimum write / erase time: 2.5ms

Operating voltage: 5V 

Maximum Supply Current: 10mA

Cured at the factory code 32 bytes of user data area write protection

Second, the memory allocation

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

92 23 10 01 46 0b 81 15 ff ff ff ff ff ff ff ff

ff ff ff ff ff 6d 77 36 36 33 00 ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Data area

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff


Third, the confidentiality of features:

1, the write-protected area (first 32 bytes) of each byte can be individually write protected, write protection, the content can not be changed (ie, curing data)

2, right before checking the password, all data can be read, if necessary, appropriate encryption of data into the ground.

3, after checking the password is correct to write or modify.
4, the three bytes of the user's password, check the correct itself after the change, the effective power to the card until the next.

5, the password error counter, the initial value of 3, check the error code 1, then subtract 1, if the counter value is 0, the card is automatically locked, the data just read out, no further changes can not verify the password again ; if not zero, one time password verification is correct, restore to the initial value.

6, the byte address 0-5,6-7 written by the manufacturer before the factory can not be changed.

Fourth, note that

Also addressing the password area, not 0-256 byte.