diamond saw blade
Used for masonry and brick cutting segment type (Special for Stone, Ceramic tile,etc)
Fetures: Keeps a good balance
good concentricity
Passing water good
114mm 115MM,125MM 150MM.....1200MM Etc
Usage: longer working life, fine cutting capability, nice surface, higher safety, smooth cutting
section & edge, thin kerf avoid more waste in cutting, etc.
AS following is part of our product. if you have any needs,please let me know.
Attention when use :
1. Before saw blade installed, pollutions adhering between saw blade and flange shall be removed,
when installing saw blade, the marked direction shall be kept consistent with the rotating direction of electric tools,
and flange shall be fastened by spanner attached to electric tools
2. Do not use any saw blade that has been deformed for being pressed of crashed
3. when operating, operator must wear safety helmet, safety footwear and goggles, protective glove,
additionally, if necessary operator must use earplug, mask and so on
4. Electric tools shall have protective cover
5. ahead of operation, operator must confirm that no other irrelevant person is present
6. cutting operation shall be started after saw blade sufficiently rotated, First cutting slowly, then normal
cutting after operation stabilized, excessive force or curved cutting is prohibited
diamond saw blade | |||
Diameter | Diameter | ||
105mm | 200mm | ||
110mm | 230mm | ||
115mm | 250mm | ||
120mm | 300mm | ||
125mm | 350mm | ||
150mm | 400mm | ||
180mm | 600mm, 800mm 1000mmm 1200mm 1600mm |