Click to enlarge
INTRODUCTION:
Thermoplastic Road Marking Paints is powder before fuse, need to be fuse before applying. it's features than cold type road marking paint is long life, strong sticking to asphalt or concret road surface. high reflective, easy transportation and stock.
PACKING:
OEM printing bags for thermoplastic and reflective glass beads available as below picture shows:
PACKAGE PICTURE OUR THERMOPLASTIC PAINT.
one layer platic bag; another polybag. so that it will be protected during rainy transportation.
Dosage:
| weight of thermoplastic | coating thickness | coating area | quantity glass beads |
| 1T | 1.5mm | 270m² | 100kgs |
Equipment need:
Thermoplastic paint pre heater
4 types different models preheater available from us
thermoplastic road marking machine
APPLICATION WAY:
1. heating upto 180-190°c, thermoplastic will be molten.
2. transfer thermoplastic into thermoplastic road marking machine
3. keep the tank warm of road marking machine. so that it will not gels before application.
4. mark the line according to requirement.
5. approve car pass the new coating line only after it dtry, commonly in 10 min's.
ATTENTION:
1. do not smoke during application.
2. do not over heating the thermoplastic paint. or the color will appear not as required.
3. cement road surface need coating oil to add its adhensive ability of thermoplastic paint.
OUR TOTAL SUPPLY ROAD MARKING EQUIPMENT AND MATERIAL
cold solvent spraying road marking machine RP-C-1
double spraying liner
PH-D-3 thermoplastic paint pre heater
RP-B-1 thermoplastic paint cross line road marking machine
thermoplastic road marking machine RP-T-1
RP-C-6 cold spraying road marking machine vehicle bone type
4 spraying liners.
Thermoplastic road marking paint white yellow or OEM color
PH-S-1 thermoplastic paint pre heater single heating kettle.
CX-2 Road Marking Removal Machine
PH-D-2 thermoplastic paint pre heater