Click to enlarge
Roll forming machinery
1.Technical parameter:
Item | Specification | |
Material | Type | Pre-painted steel coil & galvanized coils |
Thickness(mm) | 0.3-0.7 | |
Yield strength(mpa) | 235-345 | |
Roller material | 45#Chrome steel | |
Forming speed(m/min) | About 20-25 | |
Output speed(m/min) | 12 | |
Speed adjusting mode | AC Frequency | |
Roller drive | Decelerating motor + Chain drive | |
Cutting mode | Hydraulic cutting | |
Cutter material | Cr12 mould steel | |
Length measurement | Encoder | |
Control mode | Mitsubishi PLC | |
Operating mode | Button + Mitsubishi Touch screen | |
Main motor power(kw) | 7.5KW | |
Hydraulic station motor power(kw) | 2.2 KW | |
2. Components of machine:
Decoiler | 1set |
Feeding & guiding device | 1set |
Main roll forming machine | 1set |
Hydraulic cutting system | 1set |
Controlling system | 1set |
Run out table | 1set |
3.Process flow:
Decoiler -- Feeding & Guiding -- Roll forming---Hydraulic Cutting – product to run out table