Verified Company
YixingJingrui Optical Instrument Factory
Click to enlarge
Quartz glass cuvettes/cuvette
Raw Material High Purity Quartz Powder
Surface Good polishing
Cup body position have not slit
External dim H×W×D (mm) | Path length (mm) | Inside width (mm) | Volume(ml) | Product material Number | ||
ES Quartz Glass | IR Quartz Glass | Optical Glass | ||||
45χ12.4χ3.5 | 1 | 10 | 0.35 | Q-0101 | I-0101 | G-0101 |
45χ12.4χ4.5 | 2 | 10 | 0.70 | Q-0102 | I-0102 | G-0102 |
45χ12.4χ7.5 | 5 | 10 | 1.7 | Q-0103 | I-0103 | G-0103 |
45χ12.4χ12.4 | 10 | 10 | 3.5 | Q-0104 | I-0104 | G-0104 |
45χ12.4χ22.5 | 20 | 10 | 7.0 | Q-0105 | I-0105 | G-0105 |
45χ12.4χ32.5 | 30 | 10 | 10.5 | Q-0106 | I-0106 | G-0106 |
45χ12.4χ42.5 | 40 | 10 | 14 | Q-0107 | I-0107 | G-0107 |
45χ12.4χ52.5 | 50 | 10 | 17.5 | Q-0108 | I-0108 | G-0108 |
45χ12.4χ102.5 | 100 | 10 | 35.0 | Q-0109 | I-0109 | G-0109 |
Application: Used in chemical industry, metallurgy, medical, pharmaceutical, food, environmental protection, power plants, water plants, oil and other industries, departments and colleges and universities, and laboratory etc.
Physical Configuration:Standard window and wall thickness.
Contact to Jingrui, you can find various Laboratory Quartzware :
Quartz Beaker (Low & Tall Form) Cell, Cylinder
Test Tube (With or With No Lid) Flange Pipe (Flange Ring)
Crucible (Low & Tall Form) Evaporating Dish
Carrier/ Boat (Flat or Round Bottom) Distilling Flask
Ball Joint,Taper & Socket Joint Kjeldahl Flask
Anti-Heat Jacket Volumetric Flask
Round Dish Boiling Flask
Cuvette Spiratron (Tubes in Coil) Stopcocks
Some Typical Characteristics of Quartz:
Very Low Coefficient of Thermal Expansion
Resistance to High Temperature
High Chemical Purity
High Corrosion Resistance
Extensive Optical Transmission from Ultra-Violet to Infra-Red
Excellent Electrical Insulation Qualities
Techincal Information of Transparent Quartz Materials:
Density: 2.203 g/cm3
Hardness: 7 (Modified Scale); 5.36.5 (Mohs Scale)
Tensile strength: 48.3 MPa
Compressive strength: >1.1 GPa
Bulk modulus: ~37 GPa
Rigidity modulus: 31 GPa
Young's modulus: 71.7 GPa
Poisson's ratio: 0.16
Coefficient of thermal expansion: 5.5×10-7 cm/(cmK) (average from 20°C to 320°C)
Thermal conductivity: 1.3 W/(mK)
Heat capacity: 45.3 J/mol
Softening point: c. 1730°C
Annealing point: c. 1180°C
Strain point: 1075°C
Electrical resistivity: >1018 Ω×m
Dielectric constant: 3.75 at 20°C 1 MHz
Dielectric loss factor: less than 0.0004 at 20°C 1 MHz
Index of refraction at 587.6 nm (nd): 1.4585
Our factory and equipments as below: