Verified Company
YixingJingrui Optical Instrument Factory
Click to enlarge
Transparent quartz cuvette,quartz cells
Jingrui optical produce all kinds of cell used in spectrophotometers
Raw Material High Purity Quartz Powder
Surface Good polishing
Cup body position have not slit
External dim H×W×D (mm) | Path length (mm) | Inside width (mm) | Volume(ml) | Product material Number | ||
ES Quartz Glass | IR Quartz Glass | Optical Glass | ||||
45χ12.4χ3.5 | 1 | 10 | 0.35 | Q-0101 | I-0101 | G-0101 |
45χ12.4χ4.5 | 2 | 10 | 0.70 | Q-0102 | I-0102 | G-0102 |
45χ12.4χ7.5 | 5 | 10 | 1.7 | Q-0103 | I-0103 | G-0103 |
45χ12.4χ12.4 | 10 | 10 | 3.5 | Q-0104 | I-0104 | G-0104 |
45χ12.4χ22.5 | 20 | 10 | 7.0 | Q-0105 | I-0105 | G-0105 |
45χ12.4χ32.5 | 30 | 10 | 10.5 | Q-0106 | I-0106 | G-0106 |
45χ12.4χ42.5 | 40 | 10 | 14 | Q-0107 | I-0107 | G-0107 |
45χ12.4χ52.5 | 50 | 10 | 17.5 | Q-0108 | I-0108 | G-0108 |
45χ12.4χ102.5 | 100 | 10 | 35.0 | Q-0109 | I-0109 | G-0109 |
Application: Used in chemical industry, metallurgy, medical, pharmaceutical, food, environmental protection, power plants, water plants, oil and other industries, departments and colleges and universities, and laboratory etc.
Physical Configuration:Standard window and wall thickness.
Contact to Jingrui, you can find various Laboratory Quartzware :
Quartz Beaker (Low & Tall Form) Cell, Cylinder
Test Tube (With or With No Lid) Flange Pipe (Flange Ring)
Crucible (Low & Tall Form) Evaporating Dish
Carrier/ Boat (Flat or Round Bottom) Distilling Flask
Ball Joint,Taper & Socket Joint Kjeldahl Flask
Anti-Heat Jacket Volumetric Flask
Round Dish Boiling Flask
Cuvette Spiratron (Tubes in Coil) Stopcocks
Some Typical Characteristics of Quartz:
Very Low Coefficient of Thermal Expansion
Resistance to High Temperature
High Chemical Purity
High Corrosion Resistance
Extensive Optical Transmission from Ultra-Violet to Infra-Red
Excellent Electrical Insulation Qualities
Techincal Information of Transparent Quartz Materials:
Density: 2.203 g/cm3
Hardness: 7 (Modified Scale); 5.36.5 (Mohs Scale)
Tensile strength: 48.3 MPa
Compressive strength: >1.1 GPa
Bulk modulus: ~37 GPa
Rigidity modulus: 31 GPa
Young's modulus: 71.7 GPa
Poisson's ratio: 0.16
Coefficient of thermal expansion: 5.5×10-7 cm/(cmK) (average from 20°C to 320°C)
Thermal conductivity: 1.3 W/(mK)
Heat capacity: 45.3 J/mol
Softening point: c. 1730°C
Annealing point: c. 1180°C
Strain point: 1075°C
Electrical resistivity: >1018 Ω×m
Dielectric constant: 3.75 at 20°C 1 MHz
Dielectric loss factor: less than 0.0004 at 20°C 1 MHz
Index of refraction at 587.6 nm (nd): 1.4585
Our factory and equipments as below: