iron oxide suction pump features

1. Advanced hydraulic model design, large flowing passage ,high efficiency and obvious energy-saving

2. The wetted parts are made of high chromium wearable alloy, so the pump has good wear resistance 
3. Large dredging depth, high density of dredging mud, good NPSH and strong suction lift ability
4. Strong through-put. wide application. It can be used in various kinds of soil quality.

5. The pump can be directly matched with either motor or diesel engine
6.Steady operating, little vibration, low noise
7. Simple & reliable constrution, easily disassembly & assembly,convenient maintaince
8. Reliable sealing without leakage
9.. Long operating life of parts

iron oxide suction pump  Product Introduction:

  The multi-purpose sludge pump is single-stage single-suction centrifugal pump, and comprises several series and various specifications such as 500mm, 450mm, 400mm, 350mm, 300mm, 250mm, 200mm,150mm and so on according to outlet diameter. The pump is innovative in hydraulic design and structural design, and adopts the overflowing part cast by strong abrasion-resistant high chromium wear-resistant alloy, so the pump has the characteristics of high efficiency, energy conservation, wear resistance, reliable operation and so on. The blade number of the impeller of the pump can be changed according to different working conditions; and the pump is suitable for conveying strong-abrasion mortar, tailing slurry, slag and so on containing big and small solid particles. The maximum mixture concentration of conveyed powdery is up to 60 percent. Therefore, the pump is ideal sand pumping and conveying equipment and users can select single machine or multiple serially-connected machines to achieve the aim of long-distance conveying according to actual working conditions. The pump is widely applied to sand pumping from river channels and reservoirs, exploiting seashore, conveying electric fly ash and conveying tails in the metallurgical industry, etc.

The pump can be equipped with different diesel engine unit, generator system and big or small pumps of different models according to different user’s requirements. 

iron oxide suction pump  Structure:

1,The pump body adopts a two-layer metal structure with an inner layer and an outer layer; the pump shell is vertically opened in the middle; and the water outlets are rotationally installed at 45 degree intervals.

2,The proper shaft seal can be selected such as auxiliary impeller shaft seal, packing shaft seal and mechanical seal according to different working conditions.

3,The pump adopts closed impeller, so the pump has good wear resistance and high pump efficiency.

4,The pump can convey mixture containing few big particles through adjusting the blade number and the impeller diameter.

iron oxide suction pump parameter

iron oxide suction pump set

iron oxide suction pump  Application:

1.Absorb the sand in the river, lake and sea.

2.Absorb the silt and sand in the river, lake, sea, reservoir , pound , electric power plant .

3.Absorb the slurry of stone processing plant.

4.Absorb the slurry in the deep well.

5.  transfering the silt, ore pulp, coal liquid, sandstone containing big solid particles.

6. dredge of silt, ore pulp, coal liquid, river, port and so on.

  Reliable quality of  sand dredge pump ,Reliable Company!

Do not hesitate to contact us if have any question.