Advantages:

 220V high voltage led strip is an "updated version" of the low voltage strip.The use of DC 12V led strip has to be with a miniwatt adapter,and its best length is 5 meters.For the projects,this is very inconvenient. Now,our high voltage strip could solve all the problems.100 meters in one line without connection,and no signal amplifier needed. Cost-saving on power supply and installation,easy to transport and install.

Features:

1. Can be run in 220V or 110V without extra adaptor or power source.

2. Can be max run 100 meter and also be cut or connected in every meter.

3. PVC tube provides good waterproof and can be used both indoor & outdoor.

4. Solid-state for high vibration resistance and good flexibility for any shape.

5. Independent LED, one led broken will not affect next leds.

6. More energy-saving, power consumption: SMD 3528—3.5W/M,SMD 5050 7W/M

7. Packing: 50meters/reel or 100meter/reel .It is the better solution for inside, outside project with long distance installed

High voltage 120led/m and 144led/m led strip

How to connect and install high voltage led strip:

1. Install: Take out the package,make sure it comes with necessary accessories,which should include:fixing clips,middle plugs,end caps,head wires.fix the strips with clips onto where you need,put the wire into sockets to light the strips.

2. Cut: Please cut the strips only along the cutting mark on the PCB,don’t cut at random.Block up the end with end caps,seal with enough glue to make sure it’s still waterproof.

3. Connect: Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue. 

Accessories used to connect and install led strip:

RGB led strip connection:

Application: