Zibo Yinghe chemical sales molecular sieves 3A,4A,5A,13X
Introduction
Molecular Sieve 3A is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.
Technical Parameter
Item | Unit | Technical data | |||
Shape |
| Pellet | Sphere | ||
Diameter | mm | 1.5-1.7 | 3.0-3.3 | 1.7-2.5 | 3.0-5.0 |
Size ratio up to grade | % | ≥98 | ≥98 | ≥96 | ≥96 |
Bulk density | g/ml | ≥0.61 | ≥0.61 | ≥0.64 | ≥0.64 |
Wear ratio | % | ≤0.10 | ≤0.20 | ≤0.10 | ≤0.10 |
Crushing strength | N | ≥30/piece | ≥45/piece | ≥45/piece | ≥85/piece |
Static water adsorption | % | ≥27 | ≥27 | ≥27 | ≥27 |
Static CO2 adsorption | % | ≥18 | ≥18 | ≥18 | ≥18 |
Water content, as shipped | % | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 |
Application
Removal of CO2 and moisture from air (air pre-purification) and other gases.
Separation of enriched oxygen from air.
Removal of mercaptans and hydrogen sulphide from natural gas.
Removal of mercaptans and hydrpogen sulphide from hydrocarbon liquid streams (LPG, butane, propane etc.)
Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams).
Removal of n-chained compositions from aromatics.
Production of bulk oxygen in PSA units .
Production of medical oxygen in small scale oxygen concentrators
Regeneration
molecular sieve Type 3A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 3Amolecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppmv.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process
Size
Zeolite molecular sieves are available in beads of 1.5-5.0mm as well as the raw powder are also available
Attention
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.
WELCOME YOUR SPECIFIC INQUIRY
CONTACT US
ZIBO YINGHE CHEMICAL SALES CO.,LTD.
TEL: +86 533 6721035
FAX: +86 533 6721045
SKYPE: eva.su5
Website: www.zbyinghe.com
EMAIL : sales3 at zbyinghe.com
Welcome to us