55%-60% Sodium Lignosulfonate
Specifications
Sodium Lignosulfonate for concrete as water reducer
1 products introduction:
Sodium Lignosulphonate ( lignosulfonate ) are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high ,adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from The sodium lignosulphonate and Naphthalin-Group High-Efficiency Water Reducer .The sodium Lignosulphonate is fit for apply to building project, dam project, thruway project etc. The Sodium Lignosulphonate is economical one.
2.Data Sheet of Sodium Ligno Sulfonate
Appearance: yellowish-brown powder
Lignin content: 50-60%
Moisture: 3%-5%
PH Value: 7-11.8
Reduzate: 4%-8%
Water insoluble matter: 0.5-1.5%
Ash content: within 15%
Lignin content | 55-60% |
PH value | 9-11 |
Moisture | Max 5% |
Water insoluble matter | Max 1.5% |
Dry matter | Min 90 |
3. main performance
1,Can reduce 10% of water consumption at least ;
2, can improve mixture of the concrete;
3, Compression strength improves by more than 15% equally on 3-28 days;
4, Can reduce the initial stage of the cement heat of hydration by a large margin;
5, Have no function of corroding on the reinforcing bar.
4. operation methods :
1. 0.2-0.5% of mixing amount in concrete (with cement weight), users can adjust the mixing amount through the test ;
2. Can use after mixed liquid , also can put with cement , aggregate into mixer to use at the same time too, need lengthen time properly;
3. the result is more obvious after mixing with high-efficient naphthalene department water-reducing agent. User can determine the suitable dosage according to the result that cement variety, aggregate situation, naphthalene department type of water-reducing agent are tested fixing;
5. Notice :
1. Strict control to avoid excessive dosage;
2When the temperature lowers under 5 C° common concrete projects are not suitable using the chemical additive independently.
3.Experiment to make sure the dosage before use.
6.packing & storage & transportation :
1.packing :It has lastic pellicle inside and is exteriorly packed with plastic woven bag with 25kg net weight per bag.
2.Storage :It shall be stored in a waterproof, rainproof place to avoid agglomeration. If there is agglomeration,smashing it or dissolving it will not affect using effect.The product is harmless and does not deteriorate in long term. It's not a flammable and explosive substance.
3. Transportation : It's suitable for both truck transportation and railay transportaion without any limit of remnant cargo or full truck.
CONTACT US
ZIBO YINGHE CHEMICAL SALES CO.,LTD.
TEL: +86 533 6721035
FAX: +86 533 6721045
SKYPE: eva.su5
Website: www.zbyinghe.com
EMAIL : sales3 at zbyinghe.com
Welcome to us