Toone ZYS48-2Z 2NO&NC LED Second electric Delay Timer

I. Brief Introduction

A. Power delay:

Contact the power supply, the product can start delay.

When the delay time reaches the preset time, the internal time relay pull-in.

B. Connect delay:

Only with power supply, the product can not start delay.

It needs to connect an external signal.

When the delay time reaches the preset time, the internal time relay pull-in.

C. Cycle delay: Contact the power supply,

it starts delay according to the expected time 1 (T1).

 Input the conversion, it starts delay in accordance with the expected time 2 (T2).

If make it reset, it will work in cycle.

D. Interval Delay: Contact to power supply or an external signal,

 the internal time relay pulls in, at the same time it starts delay.

When it reaches the preset time and the internal time relay will release.

II. Using Conditions

1. Sea level height: less than 2500m  

2. Surrounding temperature: -10-40

3. Ambient humidity: no more than 90%

4. Fluctuation voltage range: 85% ~ 110% rated voltage

5. DC power supply ripple factor: less than 5% Weight::about 80g

Technical Parameters

1. Rated voltage: 1. AC 2. DC 3.AC/DC  

380V, 220V, 110V, 48V, 36V, 24V, 12V

2. Repeat error: ≤±1%

3. Delay Accuracy: 0.03% 10mS

4. Voltage fluctuation error: during rated voltage: 85% 110%, error±5%

5. Temperature error: during temperature: -10 ~ +40 , error ≤±10%

6. Contact Capacity: AC250V 5A  coos1 DC12 7A

7. Installation: panel type, device type, guide type

8. Mechanical life: 1000,000 cycles

9. Electrical life: 100,000 cycles