Click to enlarge
| MP-888 | Microprocessor Temperature Controller | ||
| Features | |||
|
|||
| Operating Elements | |||
| Term | Function | ||
| Set Value Indication | Set temperature, required temperature | ||
| Actual Value Indication | Actual temperature, measured, effective temperature | ||
| Flow Rate Indication | Display in litres/min (British) or gallons/min (American) | ||
| Temperature Adjustment | Raise / Reduce of set value | ||
| Programming | Press 3 seconds (Program Steps 1 - 67) | ||
| Flow Control | |||
| Monitoring (LED Green) | Flow control active | ||
| Alarm (LED Red) | Alarm flow control | ||
| Cooling ON | Lights up when the cooling relay is activated | ||
| Heating ON | Lights up when the heating relay is activated | ||
| Sensor Failure | Lights up when the sensor is not connected correctly or the wrong type of sensor is used | ||
| Temperature Deviation Control | Lights up when the difference between set and actual temperature is too high. Factory set ± 5°C (± 9°C) | ||
| Maximum Temperature | Lights up, when the maximum temperature has been reached. (Model Dependant) | ||
| External Temperature Control | Lights up when the set point is adjusted from external by putting on current / voltage. | ||
Similar products