Click to enlarge
This model is compact design, mature technology, reasonable structure, stable operation, high quality, energy efficient, by all kinds of customers, can be widely used in various types of soft / hard-conductor wire (copper wire, enameled wire, tinned wire, copper Steel, copper clad aluminum, etc.) and electronic wire stranding, such as: photovoltaic cable, power cable, telephone cable, audio cable, video cable, automotive cable, network wire etc..
2、【Technique Feature】:
1. The maximum spindle speed of 1800rpm.
2. Automatic tension control: When stranded, closing line from the bottom of the pan when you receive full plate up tension increasing demand, this function automatically tracking adjustment up tension; so that the entire dish up tension uniform, while the machine can not down to adjust the tension.
3. Host for grease lubrication, effectively extending the service life of the spindle bearings. Over the line system using the new structure, the wire from the spindle guide wheel directly over the line to the bow belt, minus the scratches and jump Shares phenomenon corner guide wheel failure due to the aluminum plate on which caused.
4. Machine equipped with three squeeze device to ensure roundness conductor stranded after reducing the loss of insulating materials.
5. Machine with belt drive, no lubrication points in the machine, to keep the machine clean, stranding no oil, adapt to various types of surface cleanliness require a higher kind of conductor strands.
6. Adjustment twisted away from simply replacing a lead to take the wheel, adjust the cutter to just flip reversing lever, simple to operate, thereby reducing the error rate and the intensity of the operator's work. • machine bearings are used in Japan known brands, bow with the use of new materials, flexible, and avoid jumping stocks caused by vibration during high-speed operation, the inverter, PLC, magnetic clutch, electromagnetic brake, hydraulic jacks all
3、【Technique specifications】：
|
specification |
TF-630P |
|
application |
Adapt to the bare wire,tinned wire,copper ciad aluminum wire,enameled wire,alloy wire to be stranded |
|
speed |
1800r/min |
|
Wire dia |
φ0.23-φ0.64mm |
|
Sectional area |
0.8-6.0mm |
|
lay |
11.15～60.24mm 14段 |
|
Take up |
Φ630mm×380mm×80mm（according to your drawing ） |
|
motor |
10HPmotor and inverter |
|
Size |
2850*1500*1660 |
|
Twist distance |
S/Z commutation can be chosen arbitrarily,ajust the direction of lay is wrenched by hand traverse is reversing rod,simple operation |
|
Cable |
Bearing type cable,row,row spacing can be adjusted |
|
Brake |
The electromagnetic brake,internal and external disconnection,automatic braking to meter |
|
Tension control |
The magnetic powder clutch control thread tension,by PLC programmable controller automatic tracking adjusting the tension,tension constant |