Click to enlarge
plastic injection machinery
1.Various Models
2.Well-Experienced Engineers
3.Timely Delivery
4.High cost-effective product
5. high quality system with fast cycle time and high efficiency
Technical parameters :
| ITEM | UNIT | DATA | ||||
| Injection Unit | Screw Diameter | mm | 38 | 40 | 43 | |
| Screw L/D Ratio | L/D | 21.1 | 20 | 18.6 | ||
| Injection Volume | cm3 | 181 | 201 | 232 | ||
| Shot Weight | g | 165 | 183 | 211 | ||
| Injection Pressure | Mpa | 177 | 160 | 138 | ||
| Plasticizing capacity | Mpa | 13 | 15 | 17 | ||
| Injection rate | Mpa | 103 | 114 | 132 | ||
| Clamping Unit | Clamping Force | KN | 1280 | |||
| Opening Stroke | mm | 360 | ||||
| Mould Thickness(Min-Max) | mm | 150-430 | ||||
| Space Between Tie-Bars | mm | 410×410 | ||||
| Ejector Force | KN | 38 | ||||
| Ejector Stroke | mm | 130 | ||||
| General | Motor Power | KW | 13 | |||
| Heater | KW | 8.5 | ||||
| Pump Pressure | Mpa | 16 | ||||
| Machine Dimension | m | 4.6×1.2×2.1 | ||||
| Machine Weight | T | 3.8 | ||||
| Mould Orientation Ring Diameter | mm | 125 | ||||
| Nozzle Radius | mm | SR10 | ||||
machine display:
Workshop & Facilities
standard device
1. Double-cylinder balance injection system
2. Multi-stage pressure & speed injection
3. Back-pressure adjustment device
4. Decompression
5. High speed clamping
6. Low pressure mold protection
7. Multiple hydraulic ejector knock-out
8. Lubrication system
9. Hydraulic pressure full proportional control
10. All computer control system
11. Molding data memory sytem
selectable
1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter
illuminations
Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value
contact person:cassie cui
mobile:+86 15153226704
skype:cassie.fo