Click to enlarge
ZR series coal burning air heater
Model | Rotating speed | Air delivery distance | Size(mm) | Heat quantity | Coal consumption | Weight | Thermal power | Temperature of warm air | Heating area | Brooding area |
|
ZR-1 | 2800 | 80 | 1400X720X1150 | 10 | 15 | 400 | 95 | 160 | 800 | 300 |
|
ZR-2 | 2800 | 120 | 1620X860X1510 | 20 | 22 | 520 | 95 | 160 | 1200 | 500 |
|
ZR-3 | 2800 | 120 | 1850X920X1560 | 30 | 30 | 660 | 95 | 160 | 1600 | 800 |
|
ZR-4 | 2800 | 150 | 1880X1300X1970 | 40 | 38 | 980 | 95 | 160 | 2000 | 1000 |
|
ZR series coal burning air heater is mainly used in poultry, vegetable planting, flower planting industry. As well as the factory, workshop, school and housing estate, where need collectivity heating. This type heater can rapidly increase the indoor temperature by using hot wind and hot water plumb system. When getting the required temperature, the heater then stops and use the rest energy to keep the temperature, achieving the purpose of keeping warm at the same time saving energy. Simple installation, easy operation, energy saving and no dust pollution. Heating efficiency as high as 95%.
1, Main chamber.
Mainly use coal to heat, Furnace added with axial flow fan. We can supply 6 types of heaters. The chamber is made of stainless steel and can withstand temperature up to 320°C. Heating efficiency can be 95%.Easy for cleaning and operation.
2, Auxiliary equipment.
Auxiliary equipment mainly consist of radiator and axial fan. By using the axial fan and radiator, the auxiliary equipment send the heating energy into the room to increase the temperature indoor.
3, Micro-computing environment controller.
Micro-computing environment controller is a new type intelligent controller especially used for industry agriculture and poultry automatic producing. Use the double 4 bits LED DISPLAY to show the temperature and humidity. It can control the time, the temperature of air and the temperature of water. The alive data is collected and dealt by the single piece engine. This system can provide a automatic control during the producing. When the power off, the controller can save the data and automatically reset when powered.
4, Circulating water pump.
The circulating water pump is installed at the inlet water tube alongside the main chamber. The main chamber and auxiliary parts are connected by the iron pipe or PRP pipe. When operating, the pump send the hot water from main chamber to the auxiliary parts, and after the water cold, send the water back to the furnace.