Verified Company
Anping Qiangguan Ironware Wire Mesh Co., Ltd.
Click to enlarge
5 layers 316 SS wire filter disc (BV SGS Certification)
Stainless Steel Filter Discs and Wire Mesh Discs are made of stainless steel woven wire mesh and wire cloth.
Characterictics
.Wide range of filter rating
It has the steady filter rating from the 1micron to 100micron.
.Steady filter rating
Due to the two protective layers, the mesh of the filter layer is not easy to deform.
.High mechanical strength
Owing to the support of fourth and fifth layers, it has higher resistance to pressure and mechanical strength.
.Easy to wash
It is very easy to wash, especially to reverse wash, by virtue of adopting the surface layer filtration material
.Heat resistance
It can resist the heat up to the 480oC.
.Corrosion resistance
It has the property of anti-corrosion as a result of adopting the material of SUS316L.
.Tractability
It suits for many kinds of machining, such as cutting, bending, punching, stretching, welding and so on.
Material
The standard materials are SUS304(AISI304),SUS316(AISI316),SUS316L(AISI316L).
Special Alloy Steel Hastelloy ,Monel ,Inconel are acceptable base on customer's requirement .
Dimension
The standard dimensions are 500x1000mm,600x1200mm and 1000x1000mm,1200x1200mm, and other dimensions in between are also available.
Modal | Pore size μm | Bubble-point Pressure ≥Pa | Permeability (N2) | Porosity ≥% | Tensile Strength ≥MPa | |
|
|
| L/min cm2.pa | M3 |
|
|
SSW-003 | 3 | 11200 | 8.0×10-5 | 9.1×10-13 | 35 | 90 |
SSW-005 | 5 | 8800 | 1.0×10-4 | 2.2×10-12 | 35 | 100 |
SSW-010 | 10 | 3860 | 5.0×10-4 | 4.8×10-12 | 24 | 100 |
SSW-020 | 20 | 1970 | 1.0×10-3 | 1.5×10-11 | 24 | 100 |
SSW-030 | 30 | 1350 | 3.0×10-3 | 2.2×10-11 | 26 | 100 |
SSW-50 | 50 | 1030 | 5.0×10-3 | 4.0×10-11 | 33 | 110 |
SSW-80 | 80 | 520 | 7.0×10-3 | 1.1×10-10 | 32 | 110 |
SSW-100 | 100 | 410 | 8.0×10-3 | 1.9×10-10 | 32 | 110 |
SSW-150 | 150 | 280 | 1.0×10-2 | 3.6×10-10 | 37 | 110 |
SSW-300 | 300 | 130 | 5.0×10-2 | 5.8×10-10 | 37 | 110 |
Maximum dimension of plate (without joining) 1200mm×1200mm | ||||||