castle with slide

inflatable bouncer Packing and delivery

Information:

Best sewing machines
Using the best sewing machines ordered to handle nylon thread we double stitch the entire unit with the best 18 ounce heavy duty Vinyl.

DOUBLE STITCHING EVERYWHERE
We double stitching everywhere, with fourfold stitching at bottom stress point. Double stitching inside and double stitching outside to make sure the inflatables are strong enough.

REINFORCED STRIPS AT JOINT
Our Inflatables will make reinforcestrips at the bottom joint and each corner. So when the kids bounce on the games, you do not need to worry about the safety at all. As the bottom can bear the kids no matter how they play on the games.

DURABLE ZIPPERS
We make strong zipper at bottom of each inflatable. Zippers can help you deflate the inflatable more quickly. Above the zipper, there is a zipper cover, which is help to disperse the zipper's stress.

SAFETY BLOWER PIPE
For the pipe connet with blower, we specially design one flap on the inside end of the pipe, it will falp up when blower on, and will flap down when power failure suddenly and the blower off. it can prevent the air outflow, and protect the children inside.

D RINGS FOR FIXATION
Each product will have thick D rings or circle rings to fix the inflatable. It makes the inflatable steady enough.

TIGHT PACKAGE BAGS
We pack inflatable games by carpet at first, then put the package in tarpaulin bag so that the packages will not be frazzled during delivery process. In order to let you find your goods quickly, we will paste a mark paper with your order number.

.inflatable slide's protection methods:
1, In order to ensure that your equipment to achieve a normal life span, please don’t let too many children participate in playing at the beginning. Usually on the inflatables only one child up to three square meters.
2, The decoration on the inflatable is for decoration, please notice the children not to pull or tear in order to avoid damage.
3, Doodle on the device with any hard things is prohibited.
4 If the equipment is damage, add some special gule in the PVC material or its coated, wait about 5 minutes, then to glue with appropriate compression and wait for a few minutes.
5, If the device's pressure is too soft, check there if there are too many leaks and torn holes, or power failure; if pressure is too storng, please block the fan air inlet a little point.
6, such as large-scale use of non-normal damage, the factory can provide professional maintenance services, or return to the factory directly for maintenance.

The cleaning and collection:
1, Cut off the power, open interfaces and exhaust fans, exhaust time usually 10-25 minutes. The  excess gas must be squeezed out. If the device is watered, Be sure to drain the water and air.
2, Do cleaning, use detergent to clean the stain, wipe away the grease, and then cleaned with water, sun to dry.
3, Fold the device, with underside hide front, then use tarpaulin to cover it.
4, if long-term leave unused,need to clean equipment, folding, bundling, packaging. The best enviroment for storage temperature is -50 ~ +40 degrees Celsius.
5, Fans should pay attention to the moisture and corrosion. Inflatable device should pay attention to rodent control insects bite.

Attention:
1, Children under 6 years old is strictly prohibited to play thrilling project.
2, Avoid young children and older children playing together in order to avoid collisions.
3.Managers should arrange the play for children, all in accordance with the rules of the game play, in order to avoid unexpected.

Management Introduction:
Our boss: Miss Mai  is  in charge of the production and design.
Sales manager:Mr Paki Peng is a very experienced salesman