Submersible irrigation  pump

Introduction          

1. Widely used for agricultural irrigation and drainage, garden irrigation, fountain water supply, well pumping,industrial and mining enterprises water supply and drainage, etc

2. The motor is filled with oil inside, water outside won't inflow the motor easily, the oil will conduct the internal motor heat rapidly, cooling effect is better, add motor's overlaod capacity, .

3. The pump bearing is dipped in oil, the lubricating and cooling is guaranteed, so the bearing life is longer than other submersible motor pump. 

4. Made up of water pump, seal and motor ,joins pump body and motor into one.

5. Have no use for pilotage, easy installation, convenient maintainance.

6. Double-end seal, electrical protection, compact structure

Working condition

1. Medium temperature : less than 40 °C
2. Ambient  temperature up to  40 °C

3. Solid  impurity in the volume no more than 0.1%, particle size less than 0.2mm

4. The using lift can not be too low , below the stipulated 80% lift easily lead  to thermal protectors, so that pump to stop running and some may even cause electrical damage.

5. The  diving depth must be less than 5m .

6. PH value of water 6.5~8.5

7. Power supply:   Single phase--------220 V+-10%, 50 HZ

                              Three  phase--------380 V+-10%

                              Other power of motor , can customize 

Model significance and specification 

Longitudinal profile

 Product pictures