MODEL

CEN-60-12

OUTPUT

DC VOLTAGE

12V

CONSTANT CURRENT OPERATION VOLTAGE Note.5

9 ~12V

RATED CURRENT

5A

CURRENT RANGE

0~5A

RATED POWER

60W

RIPPLE & NOISE (max.)        Note.2

2Vp-p

VOLTAGE ADJ. RANGE          (SVR1)

10.8 ~ 13.5V

CURRENT ADJ. RANGE(SVR2)

3.75 ~ 5A

VOLTAGE TOLERANCE        Note.3

±10%

LINE REGULATION

±3.0%

LOAD REGULATION

±5.0%

SETUP. RISE TIME  

1400ms / 230VAC 2800ms / 115VAC at full load

INPUT

VOLTAGE RANGE       Note.4

90 ~ 295VAC 127 ~ 417VDC

FREQUENCY RANGE 

47~63HZ

POWER FACTOR (Typ.)

PF>0.97/115VAC, PF>0.95/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve)

EFFICIENCY (Typ.)

86%

AC CURRENT (Typ.)

0.8A/115VAC         0.4A/230VAC         0.3A/277VAC

INRUSH CURRENT (Typ.)

45A/230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

PROTECTION

OVER CURRENT            Note.4

95 ~ 110%

Protection type : Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE  

14.5 ~ 17V

Protection type : Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

85°C±10°C(RTH1)

Protection type : Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.

-30 ~ +70°C(Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80°C, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/°C (0 ~ 50°C)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY&EMC

SAFETY STANDARDS       Note.7

UL879, UL8750, CSA C22.2 No. 207-M89, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP66, J61347-1, J61347-2-13 approved

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC     I/P-FG:1.88KVAC     O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH

EMC EMISSION

Compliance to EN55015, EN61000-3-2 Class C (≥75% load) ; EN61000-3-3

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, EN61547, light industry level (surge 4KV), criteria B

QTHERS

MTBF

523.4K hrs min.     MIL-HDBK-217F (25°C)

DIMENSION

185*62.5*40.5mm (L*W*H)

PACKING

0.56Kg;24pcs/14.4Kg/1.11CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltage. Please check the static characteristics for more details.

5. Constant current operation region is within 75% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.

6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.