variable Voltage Lavetube Ecig  kit  with EH IMR 18650  2000mah  battery

Specification:

content

A. 1 x lava tube 2.0 device

B. 2 x 510 high ohm atomizer(ce4 atomizer available)

C. 2 x EH IMR 18650 battery

D. 1 x18650 battery charger

E. 1 x normal zipper case or standard gift box package

F. 1 x user manual

1. Power on/Off Button: hold the button down for 5 seconds to turn the device on, hold the button again for 5 seconds to turn the device off.

2. "+ " Button: On press, increases voltage by .1 increments between 3volt and 6 volt.

3. "-" Button: On press, decreases voltage by .1 increments between 3volt and 6 volt.

4. "+ "and "–" Button: Press and hold both buttons for five second to disable the + and – button, locking the device on the voltage it is currently set at.

5. Regulated output: Keeps the voltage the same with each puff regardless of the remaining battery power. As the battery drains, the device will keep the voltage consistent.

6. 10 Second Cutoff timer: If the activation button is held down for 10 seconds or longer, the Lava Tube will shut itself off until the button is released. To prevent overheating the atomizer and the device.

7. Short Circuit/Atomizer Protection: The Lava Tube can recognize an atomizer with too low of a resistance for the current voltage setting and will drop the voltage to 3.7v to protect both the battery and atomizer. If the atomizer is too low or shorted out it will shut off power to the device to protect the Lava Tube from being damaged.

Contact information:

Shipping Methods: