GM Tech-2 PRO Kit (CANdi & TIS)
Product Name:  GM Tech-2 PRO Kit (CANdi & TIS)
Part No.:  CCX012
Net Weight:  6.5KG
The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech-2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2007
Features:
Authentic GM software in the Tech-2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech-2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional controls when performing power train, chassis, and body diagnosis.
Vetronix Tech-2 Specifications
Dimensions 12×6×2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for future expansion.
Communications Integral RS232 communication port.
Screen 3.8×2.8 backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once

GM Tech-2 Starter Kit with CANdi Module & TIS Kit includes (All ORIGINAL and NEW!):
l         Tech-2
l         3000164-CANdi module
l         memory card 32MB- 1pcs

kit of the cables:
l         3000095-DLC cable
l         3000096-Cigarette lighter power cable
l         3000097-Battery power cable
l         3000098-SAE 16/19 pin adapter (OBD2)
l         3000099- NAO 12/19 adapter
l         3000109-DLC loopback adapter (selftest)
 
l         DVD with software :
Opel TIS 01/2008,
SAAB TIS 1/2008,
NAO TIS 10/2007,
ISUZU TIS 03/2006;
manuals in DVD
 
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech-2 Flash and a CAN diagnostic interface module. The module connects between the Tech-2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
The following GM vehicles utilize the CAN interface:
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)