Click to enlarge
MBD-089 LED emergency Light/Emergency Exit Sign/Rechageable Light
OVERVIEW
Malon ML-B089 emergency light, adopted high efficency LED technology, is able to conduct autonomously self testing, cutting down the consumption for failure inspection. Periodic operational and full duration test ensures the stability and persistency. The device, instantly alternating operatation status on power interruption, conflagration, earthquake, indicating precise emergency exit direction, is applicable to hotel, restaurant, shopping mall and tall building etc. This series of product are up to EN60598-1:2008/GB17945-2010 Standard.
CAUTION
Keep power supply within nominal range(AC220~230V50/60Hz).
Installation must be away from hyperthermia substance, gas or exhaust pipe, avoiding overheated or ignition.
Avoidance to apply in the condition of hyperthermia, humidity or corrosive gases,the ideal temperature would between -10°C to +40°C.
Prevent to fierce vibration or collision.
Avert violent impregnant or chemical usage while device cleansing.
Avoidance electrocution, please don’t unpacking the product by amateur.
Deny for refitting components or parts of the product at discretion.
Key Figure
NOMINAL VOLTAGE AC220~230V50/60Hz
CHARGE PERIOD 20hours
NOMINAL POWER 3W
OPERATION PERIOD ≥3hous
ILLUMINANT LED
IDEAL TEMPERATURE -5°C+40°C
BATTERY Ni-MH 1.2V 0.8A·h
INGRESS PROTECTION IP20
PRODUCT FEATURE
1,Automatical power-switch alternate on emergency status
2,Overdischarge protection available
3,Rigorous design for short-unicircuit protection
4,Intelligence charging function
5,Manual test function
6,AUTOTEST every 30 days
7,Auto test on full duration every 360days
8,Sound and light alarming function
9,Manual control module under emergency status
Inspection:
Any issues induce the device malfunction, please take the inspection method below.
PHENOMENON | CAUSE | MEASURE |
RED LED is OFF | 1, Power supply failure 2, Improper power plug insert 3, PCB damage | 1, Consult the electrician 2, Insert the plug properly 3, Remit the device for further inspection |
YELLOW LED is ON | 1, Battery failure 2,PCB damage | 1, Check the battery plug 2, Remit the device for further inspection |
Emergency period insufficiency | 1, Insufficient charge 2, Prolonged unoccupation | 1, Extend charge for 20 hours 2, Reiterate charge/discharge |
Malon Electrical Factory
No.27 North Dong'an Road,
Haizhou District,
Guzhen Town,
ZhongShan City,
Guangdong Province,
China
Post Code:528422
Tel: (86) 0760 22314216
Fax: (86) 0756 23838520
....