Wooden Pencil Machine|Wooden Pencil Production Line|Wooden Pencil Making Machine

1. HIGH SPEED GROOVING MACHINE

I. APPLICATION AND SUMMARY:

This machine is one of the main equipment of wood pencil production line. Its function is to process leading groove (i.e. line leading groove), plate surface, and pencil core groove and side datum plane on the crude wood slates. The characteristic of this machine is high production efficiency, high processing accuracy, low noise, easy for operation and convenient for maintenance.

II. PERFORMANCE PARAMETER:

1. Capacity                      20~80 slats/min;

2. Power supply                     3 phase AC 380V 50HZ;

3. Power of motors             6.75kw;

4. Main spindle speed            8300 r.p.m.;

5. Net weight                         2350kg;

 6. Overall dimensions

(L×W×H)     2300*1050*1500mm (main machine)

                                      500*500*1500 (electric box).

2. LGJ80 LEAD LAYING AND GLUING MACHINE                    

I. APPLICATION AND SUMMARY:

   This machine is one of the main equipments in workshops making wood pencil rods. It is used in smearing the gluewater on the wood slats which have been grooved by Grooving Machine, and used in fixing the lead, then glueing every two slats together, and then sending them into Clamp & Dryer Machine for stoving.

II. PERFORMANCE PARAMETER:

1. Capacity                                             36 blocks/min.

2. Power supply                                      3 phase AC 380V 50HZ

3. Power of motors                              1.5kw

4. Net weight                                 800kg

5. Overall dimensions (L×W×H)              1400*1300*1900mm

3. LGH90 CLAMP DRYING MACHINE FOR SLATS

I. APPLICATION AND SUMMARY:

GH90 is an important equipment in the pencil production line. It is used to clamp the raw slats which have been glued up by the Lead Laying & Gluing Machine, and send the slats into the ultrared heater vent quitter for drying. This machine can match the LGJ80 Lead Laying & Gluing Machine which is made by our company, thus to meet the production requirements of pencil production line, and to produce well qualified and cheap pencils.

II. PERFORMANCE PARAMETER:

1. Power supply                                     3 phase AC 380V   50 HZ

2. Power of motors                         2.2kw

3. Power for heating                         15.7kw

4. Quantity of chain links          36 link x50piece

5. Total weight                             3600kg

6. Overall dimensions (L×W×H)       5100*1200*1480mm

4. LGT92 END CUTTING SAW FOR GLUED SLATS

I. APPLICATION AND SUMMARY:

This machine is a special machine of wood working equipments for pencil making factories. Its function is to cut two ends of dried glued slats, and make the slats to the desired size. This machine is a preset and assistant equipment of LGQ80 High-Speed Shaping Machine and should be connected with LGQ80 Shaping Machine when working. If necessary, a sole power unit can be afforded with this machine by order.

II. PERFORMANCE PARAMETER:

1. Capacity                              0~80 slats/min;

2. Power supply                              3 phase AC 380V 50 HZ;

3. Power of motors                    1.5 kw;

4. Specification of cutter              φ30*φ315*3.2;

5. Specification of glued slats        width   68~71mm;

                                                  length  180~190mm;

6. Net weight                        1000kg;

7. Overall dimensions                940*1180*1660mm.

5. LGQ80A HIGH SPEED DOUBLE SHAFTS SHAPING MACHINE

I. APPLICATION AND SUMMARY:

This machine is one of the main equipments of wood pencil producing line. It is used in completing pencil shape processing, i.e. shaping raw slats (wood pencil slats which have been glued with pencil leads) to different section shapes of pencil rods. It's characteristics is high production efficiency, high processing accuracy, low working noise, simple for operation, convenient to maintenance, and reliable application.

II. PERFORMANCE PARAMETER:

1. Capacity                    0~80 slats/min;

2. Power supply            3 phase AC      380V 50HZ;

3. Power of motors           9kw;

4. Net weight                  2600kg;

5. Overall dimensions

(L×W×H)    2200*1100*1500mm(main machine);                        500*500*1500mm(electric box)

6. LGS80 HORIZONTAL POLISHING MACHINE

I. APPLICATION AND SUMMARY: 

   LGS80 Polishing Machine is a key equipment in the production lines making pencils. It’s main function is to burnish the rough pencil rods, and then send the pencil rods to the next process of painting. This machine has the characteristics of high reliability and high efficiency, easy for operation and easy for repairing.

II. PERFORMANCE PARAMETER:

1. Capacity                            320 pieces / min;

2. Electrical source                 3 phase AC 380V 50HZ ;

3. Power                             3.39kw;

4. Weight                            750kg;

5. Overall dimensions (L×W×H)   2300*1100*1300mm.

7. LGDP80 PAINTING MACHINE  

I. APPLICATION AND SUMMARY:

   The machine is a special equipment used in factories producing pencils. It’s function is to paint and decorate the rough pencils. The machine is an essential equipment in the production line making pencils.

II. PERFORMANCE PARAMETER:

1. Capacity                                560 pieces / min.

2. Electrical source                 3 phase AC 380V 50HZ

3. Power                                     1.1kw

4. Weight                         1100kg

5. Overall dimensions (L×W×H)   10790*1000*1780mm

8. SINGLE END CUTTING MACHINE

I. APPLICATION AND SUMMARY:

This machine is a special equipment in painting and finishing workshop making pencils. It is used for cutting the single end of pencils with various section shapes of pencil rod. The advantage of this machine is high efficiency and high quality of working.

II. PERFORMANCE PARAMETER:

1. Capacity                               400 pieces / min.

2. Electrical source               3 phase AC 380V 50HZ

3. Power                                 1.72kw

4. Weight                                800kg

5. Overall dimensions (L×W×H) 1550*1100*1300mm

9. LGD83 SINGLE SIDE STAMPING MACHINE

I. APPLICATION AND SUMMARY:

       This machine is an equipment used for processing finishing products. It' s function is to stamping trade marks, factory names, and other required nots, It can stamp on the single face of pencil rod.

II. PERFORMANCE PARAMETER:

1. Capacity                       90pieces/min

2. Electrical source             3 phase AC 380V 50 HZ

3. Power                         1.4kw

4. Weight                         500kg

5. Overall dimensions (L×W×H)   1500*950*1350mm

10. LGD80 TWO FACES STAMPING MACHINE

I. APPLICATION AND SUMMARY:

This machine is an equipment used for processing finishing products. Its function is to stamping trade marks, factory names, and other required nostril can stamp synchronously at the opposite faces of pencil rod, or can & tamp on the single face also.

II. PERFORMANCE PARAMETER:

1. Capacity                        90 pieces/min;

2. Power supply                          3 phase AC 380V 50 HZ;

3. Power of motor                        1.22KW;

4. Power of heater                               400KW×2;

5. Specification of pencil                standard;

6. Net weight                                   700KG;

7. Overall dimensions(L×W×H)            1700*1340*1430mm.

 Etc.