Click to enlarge
1. Dielectric: Polyester Film
2.Plates: aluminum layer deposited by evaporation under vacuum
3. Winding: non-inductive type
4. Leads: tinned wire
5. protection: Coated fiame retardant epoxy resin
6. Marking: manufacture's logo, series dielectric code, capacitance, tolerance, D.C.reted volatge
Rated voltage(V) | 100VDC 250VDC 400VDC 630VDC |
Capacitance range | 0.01uF~10uF |
Capacitance tolerance: (measured at 1KHZ) | ±5%(J) ±10%(K) ±20%(M) |
Dissipation Factor(DF): (measured at 1KHZ) | ≤0.8(at 25°C ±5°C) |
Insulation Resistance | Test conditions Temperature:25°C±5°C Voltage charge time: 1 minute Voltage charging: 100VDC ≥5.000MΩ for C≤0.33uF ≥10.000ΩF for C>0.33uF |
Test voltage between terminations | 1.75*V applied for 2 sec (at 25°C±5°C) |