Verified Company
Jiaxing Jinyi Solar Energy Technology Co., Ltd.
Click to enlarge
How integrated heat pipe solar water heater works:
Solar collector evacuated tubes collect and convert sunshine energy into thermal energy, which is transferred to the central heat pipes in the tubes through the aluminum fins bridging the tube inner surfaces and the heat pipes. The copper heat pipes have tiny amount of purified water sealed in them at depressurized condition. When heated, the water inside the heat pipes vaporizes at low temperature (about 30oC). The vapor (steam) rises to the pipe tips inserted into the water contained in the tank. Vapor is cooled down and becomes condensate falling to the bottom of the pipes. By continuously circulating this way, heat is carried from outside to the water inside the tank.
Specification of intagrated heat pipe solar water heater:
| Model | JPH-24 | ||||||||
| Tank | Tank Capacity | 240L | |||||||
| Inner Tank | Material | Stainless steel 316 | |||||||
| Thickness | 1.2mm | ||||||||
| Diameter | 360mm | ||||||||
| OuterTank | Material | Stainless steel 304 | |||||||
| Thickness | 0.4mm | ||||||||
| Diameter | 470mm | ||||||||
| Insulation | Polyurethane foam | ||||||||
| Insulation Thickness | 55 mm | ||||||||
| Insulation Density | 40Kg/m | ||||||||
| Connections for inlet, | 1/2” | ||||||||
| Connections for Outlet | 3/4” | ||||||||
| Connection Seals | No-weld Technology | ||||||||
Heat
pipe
solar
collector | Collector Area | 2.59M2 | |||||||
| Absorber Area | 1.951M2 | ||||||||
| Fin material | Aluminium alloy | ||||||||
| Fin length | 1620mm | ||||||||
| Fin thickness | 0.25mm | ||||||||
| Heat pipe tube material | copper | ||||||||
| Heat pipe number | 24pcs | ||||||||
Vacuum tube | size | 58*1800mm | |||||||
| material | borosilicate glass | ||||||||
| number | 24pcs | ||||||||
| Heat pipe condensor diameter | 14mm | ||||||||
| Heat pipe condensor length | 55mm | ||||||||
| Heat pipe condensor thickness | 1.0mm | ||||||||
| Heat pipe body material | copper | ||||||||
| Heat pipe body thickness | 0.6mm | ||||||||
| seal ring | silicate aluminium | ||||||||
| Warranty | 5 years | ||||||||
| Stand | Material | Powder Coated | |||||||
| Galvanized steel | |||||||||
| Thickness | 1.5mm | ||||||||
| Angle | 30/38/ 45 degree | ||||||||
- Vacuum tube: Twin-glass with three target coating of ALN/AIN-SS/CU, 58X1800mm
- Heat pipe : length: 1.7m, thickness:0.6mm, TU1 copper
- Outer tank: stainless steel 304, thickness: 0.4mm
- Inner tank: stainless steel 316L, thickness: 1.2 mm to 2.0mm
- Installation angle: 20/30/38/45 degree
- Insulation layer: Polyurethane 55mm, density: 42Kg/m3
- Diameter of inner tank: 360mm;
- Diameter of outer tank: 470mm;
- Distance for tube to tube: 75mm.
Pictures: