Brief introduction:
Jinyi JPT series high pressurized stainless steel unvented hot water cylinder are specially designed to be compatible with solar heating system. Tanks range from 50L to 800L and they could come with or without coil heat exchanger. All tanks are CE certified.
About us:
1. We have 12 year history/experience in manufacture solar water heater products;
2. We are a directly manufacturer, have our own factory, we manufacture: Pressure water tank, heat pipe/U-type solar collector, split pressure/heat pipe pressure/nonpressure solar water heater.etc;
3. We are near Shanghai city for 25minutes by train, it’s convenience for you to visit us, welcome!
4. Our factory is 12000 square meter big, our showroom is 100 square meter big;
5. We 100% test each tank with 10Bar/1.0MPa pressure to avoid leakage problem;
6. We produce each order strictly with the Auto CAD drawing paper.
7. We attend fair: 1) Intersolar Fair in Munich, Germany; 2) Canton fair in Guangzhou, China;
8. Our production capacity is 3000 units/month;
Jinyi stainless steel unvented hot water cylinder advantages:
1. Extremely low heat loss: all Jinyi solar water heater tank are very well PU foam insulated, compared to traditional mineral wool is about 40 % better, for a normal household this equals a saving of approximately 450 kWh per year. Under one-off modling/high pressure foam technology, with 50-60mm thickness, 42Kg/m3 density, the heat loss is extremely low.
2. Anti-corrosive protection: Use super big size magnesium anode for additional anti-corrosive protection, long service life.
3. High heat exchange efficiency: Large heat exchanger surfaces make tanks ideal for solar water heating system.
4. Smooth coil pipe surface for excellent heat conduction.
5. Inspection flange easily used for inspection and cleaning the inside of tank for maintenance purposes, guarantee the water quality.
6. Available with one or two heat exchangers, suitable for every application.
7. Adopt special Incoloy 800 electric heater, which have super anti-corrosion, dry-heat resistant, super heat conduction, etc feature.
8. Inner tank and internal heat-exchanger coils made of same material-stainless steel, can welded together, avoid potential leakage problem.
9. Each inner tank is individually tested for high pressure up to 10Bar/1.0MPa pressure.
Jinyi Unvented Hot Water Cylinder Parameter Sheet | |||
No | Item | JPT2-200 | |
1 | Tank | Capacity | 200L |
2 | Inner tank material | SS304-2B | |
3 | Inner tank diameter | Φ450mm | |
4 | Outer tank diameter | Φ540mm | |
5 | Outer tank material | Color steel | |
6 | Outer tank color | Blue | |
7 | Insulation layer(density) | PU foam, 43Kg/m3 | |
8 | Insulation thickness | 45mm | |
9 | Heat-exchanger(Coil) | Heat-exchanger quantity | Double |
10 | Heat-exchanger material | SS304-2B stainless pipe | |
11 | Heat-exchange area-upside | 0.75m2 | |
12 | Heat-exchange area-undersid | 0.75m2 | |
13 | Heat-exchanger Max. Hydraulic Flow(m3/h) | 3 | |
14 | Connector | Cold inlet | 3/4'' |
15 | Hot outlet | 3/4'' | |
16 | Circulation inlet | 3/4'' | |
17 | Circulation outlet | 3/4'' | |
18 | Air vent hole | 3/4'' | |
19 | Magnesium anode | 3/4'' | |
20 | Drain outlet | 3/4'' | |
21 | Temperature sensor | 1/2'' | |
22 | Electric heater | 1'' | |
23 | Electric heater power | 1500W | |
24 | Temperature sensor quantity | 2 pieces | |
25 | Max test pressure | 1.2MPa | |
26 | Operation pressure | 0.6MPa | |
27 | Max temperature | 90°C | |
28 | Package | Package material | Carton box & foam |
29 | Package size | 63×63×144cm | |
30 | Container load QTY-20'/40' | 39/84 unit | |
31 | Certification | CE, ISO | |
32 | Warranty | Depend on water quality | |
33 | Commercial term | Loading port | Shanghai, China. |
34 | Sample order | Yes | |
35 | MOQ | 1 unit | |
36 | Delivery time-sample | 7 days | |
37 | Delivery time-full container | 10-15days | |
38 | OEM | Yes | |
Note | |||
1 | Material option | Outer tank: stainless steel SS304-2B or Color steel(galvanized): Blue, white, silver gray. | |
Inner tank: stainless stee lSS316 or SS304-2B, thickness is option too. | |||
Heat exchanger/coil: stainless stee lSS316 or SS304-2B pipe, pipe diameter and length are option too. | |||
2 | Logo | PVC decal, pasted on the outer tank body, print on carton package. | |
3 | Production capacity | 2000 units/month. | |
4 | Price | Based on tank material, capacity, thickness, quantity and payment term. | |
5 | Wedling technology | Argon arc welding. | |
6 | Warranty | Depend on cold water quality. | |
7 | The above product picture just for your reference. | ||
8 | Other products | Heat pipe solar collector, U type solar collector, Pumpstation, Solar hose, Compact pressurized system, Compact nonpressure system, etc. | |
Service | |||
1 | Customized production | Make tank accord to your own tank drawing and special request. | |
2 | Rapid response | We anser your inquiry and email in 24hours, | |
3 | Sample packing | Use plywood pallet to re-package and protect, make itarrival at good condition | |
4 | Logistic | We can arrange the shipping for you. |
Gallery
Double coil tank installation display