JHC-5818-20 Pressurized Solar collector

   The pressurized heat pipe solar collector is always connected with existing heating supply device.Metal heat pipe solar collector consists of a heat pipe, a metal heat absorption wing and the connecting manifold. The metal heat absorption wing with selective absorption coating converts solar energy into heat energy and transfers it medium liquid inside. The vacuum between the two glass tubes works as insulation. The liquid in the heat pipe changes into vapor which rises to the condenser. When passing through the heat exchanger, the heat is absorbed and the temperature is lowed, and the vapor becomes liquid, returns to the base of the heat pipe. This transference of heat is a continuous circulation as long as the collector is heated by the sun.

1.Working principle:

  2.Features:

• Manifold (interior): thickness1.0-1.2  Copper pipe
• Manifold Casing Material: thickness 2.0mm Aluminum alloy (Black or silver)
• Insulation: high desity rock wool
• Frame Material 2.0-3.0mm thickness Aluminum alloy
• Vacuum tube dimension: ø58mm* 1800mm
• Coating of vacuum tube: CU-SS-ALN/ALN.
• No of vacuum tube: 20pcs
• Daily output (50 oC ): 120-180L
• Daily efficiency:  average ≥55%, ≥45% in winter
• Heat pipe: anti-freezing > -35 centigrade
• Optimal installation angle 20-70°Vertical
• Test Pressure: 1.2 MPa (12 bar)
• Working pressure: 0.6 Mpa (6 bar) 

   3.Specifications :

   Evacuated tube& Tube Seals

   Heat pipe&Heat Transfer fin

 Manifold

  4.products show

5.Marketing