Fluke 773 Clamp Meter Specifications
Measure 4-20 mA Signals Without Breaking the Loop!

If you need more time in your busy day check out the Fluke 77X mA Clamp Meters. They are designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Measure mA signals for PLC and control system analog I/O

Voltage output linear ramp or 25% step output
mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
DC voltage measurement to verify 24V power supplies or voltage I/O signals
mA output linear ramp or 25% step output
Source 4 to 20 mA signals for testing control system I/O or I/Ps
Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
measure 4 to 20 mA signals with in-circuit measurement

GENERAL SPECIFICATIONS
Function     Resolution and range     Accuracy     Notes
Voltage source
Voltage measure     0 to 10.00 V dc
0 to 30.00 V dc     0.2 % + 2 counts     2 mA maximum drive current

VICTOR VC2000 High Frequency Counter 2.4GHz