Click to enlarge
1. Introduction
2. Main Advantages:
1. The frame of the block-forming machine is made of rectangular steel.
2. The guide columns are made of 45# quenched and tempered steel with their surfaces hard chromium coating.
3. The advanced composite bearing materials are used on the guide sleeves.
4. Three-stage pressure control valves made in Taiwan are used on the hydraulic system.
5. Single frequency conversion motor and shaft-transmission technology are adopted for the vibrating section.
6. For the PLC control system, control software specialized for the machine of Model-5 has been developed.
3.Main Technical Specifications for QT4-15
Overall Size | 3000*2200*2900mm |
Molding Cycle | 15-20S |
PalleSize | 935*580*20/25mm |
Weight | 8.5T |
Rated Power | 15.5kw |
Vibration Force | 60KN |
Vibration frequency | 2850/min |
Mixer model | JS50 |
4. Productivity (Send us your block size and the colour you need, we will design it
as your requiremet. )
Item | Specification(L*W*H) | Quantity per hour(PCS) | PSC/Mould |
Concrete block | 390×190×190 | 640-720 | 4 |
Solid block | 240×115×53 | 3800-4500 | 30 |
Porous block | 240×115×90 | 1900-2250 | 14 |
5.Conditions of productivity
1. QT4-15B block making machine need 4-6 workers for operating, transporting
the block.
2.QT4-15B block making machine workshop area need 90-120 m2, the bigger, the better.
3.The final block raw materials are easy to get,The rate of the raw materials as follows:
- Fly ash brick: Fly ash:30%, slag:30%, stone chips:30%, cement:8-10%,
- Stone chips brick:stone powder:60% ,stone chips:30%, cement: 8-10%,burnt lime:3%,
- River sand brick: river sand:55-60%, stone powder:30%, cement: 10-15%
- Shale brick: Shale:90%, cement:8-10%,rock sand:0.2%,KCL:0.2%
Note: The customer can appropriate readjustment the propotion based on self condition.
The capacity for the colour paver:
Name | Picture | Size(L*W*H) | Capacity Pcs/8hours |
Ripple shape |
| 225*112.5*60mm | About14000 |
Square shape |
| 300*300*60mm | About 2880 |
The block size and the block mould:
The equipments we supply
1.Belt Conveyor 2.Brick Forming Machine 3.Hydraulic Unit 4.PLC control Sys(remote control and touch screen system) 5.Mould(size as you requested) 6.Stacker Machine 7.Manual Hydraulic Forklift*2
Mixer model
PLD1200 batching machine
Our workshop:
Contact person:
Name: Cherry Cui
Skype:cherry07719
Mobile: 86 15265172292