In our processing,there is an auto-feeder for puting into the material.60T hydraulic pressure,can feed 500 kg one time,if 10tons tyre,feeding time will last 2 hours.And if you choose the feeder,that means no need workers lift up the tyres into the reactor,save manpower.After dischage the carbon,if you use feeder,no need wait the reator cool down,can start next batch directly,cause no need worker go inside to feed,can save time and also very safe,after finish one bacth,there are lots of different gas inside the reactor,even you cool down it,how can you ensure it's safe when your workers go inside.So this is the heart point of our auto-feeder.

Reactor is the most important of whole system,actually,the lifetime is according to the material of reactor. Before,all the companies use Q245R boiler plate,untill now,most of them still not change,but we already changed to Q345R many years,the quality of these two material are totally different,Q245R only can last 400 batches,but Q345R can last 650-700 batches.Why the price of machines are different?If really same quality and cost,how could they sell the machine lose cost,I think that's not true. Also for our reactor can process both plastic and tyre,if you have these two materials,this is designed for you sir,only this machine is worthy of you.

This is patent,this is designed by our boss,also our engineer,a safe deivce,principle is very simple,use the moter and water pump keep the water rotating at a high speed,keep there is a vacuum,then can suck all the gas from reactor,before 100 degree,can suck all the steam,there will be no water in the oil.And also if all the gas is sucked to the back,inside the reactor pressure will be negative,more safe.Also the pyrolysis tempreture will be lower,can save energy.

In our machine,there are two horizontal condensers. Some people said that the big pool is better than condenser and also said more pipes inside the condenser or more condenser and so on. I just want to ask them:Do you understand pyrolysis machine and oil refining machine? In all of the world,the standard cooling is pipe condenser,and also the distance of cooling can not be very long ,that will reduce oil percentage.This is not secret,but why more and more customer said that' good? Cause most customers don't know this machine,so some companies just make different and shape to cheat.