Verified Company
Xinxiang City Jinzhen Machinery Manufacturing Co., Ltd.
Click to enlarge
Not Easily Deformed incinerator chemical waste
Flow chart
High oil yiled
Raw Material | Oil Output | |
Weaves & Handbags | ≈60% | |
Soles | Sports shoes soles | 27%-33% |
Black rubber soles | ≈35% | |
Gum-rubber outsole | ≈45% | |
Tyre | Steel tyre | 40%-45% |
Nylon tyre | ≈40% | |
Tyres of bikes etc. | ≈35% | |
Paper Mixture | Rough material | ≈15% |
Washing Material | 23%-26% | |
PE material | 70% | |
Cabin Skin | PE cable skin | ≈85% |
PVC cable skin | ≈25% | |
Pure rubber cable skin | ≈35% | |
Telephone line | ≈50% | |
Life garbage | Pure (plastic bags) | ≈50% |
Wet Mixture | ≈15% | |
Others | Usual rubber tubes | ≈30% |
Car glass bead | ≈50% | |
Beverage Bottle Cap | ≈50% | |
Beverage Bottle | ≈30% | |
waste tire recycling machine dimension: D2200mm x L6600mm(D = diameter L= length)
Material: Plastic rubber (tires), life garbage
· Structure: Horizontal type revolves
· Oil yield (tire as raw materials): 40%-45%
· Carbon black: 30 to 35%
· Steel wire: 10 to 15%
· Gas: 12 to 15%
· Work pressure: Normal Pressure
· Cooling Method: Water
· Fual material: Coal, Wood, Fuel gas, Fuel oil, charcoal, LPG
Environmental Protective
Dispose waste gas, liquid, and residua in the process:
a. Waste gas: Transferred through two safety device: water close &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of patent in our company Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of GB-2001.
b. Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless waste water was introduced to evaporator (use the heat of the flue of main processor as its heating resource)
c. Waste solid. The solid residua will be left after the catalyst splitting from scrap plastic, approximately composes the waste plastic weight about 5% to 10%. Its main component is the black carbon. It can be the raw material of the production industry of black carbon. Also could be mixed with the pulverized coal ash which produces for the raw material thermal power plant, also could be the raw material of manufacture pulverized coal ash brick (one kind of environmental protection building material).
Hotline:+86-13373760728
Sarah will be service of you all the time!