Low Cost Coriolis Mass Flow Meter
I. Main technical parameters
(I) Measurement scope :2kg/h~500t/h
(II) Accuracy :±0.2%~±0.15%
(III) Work pressure :(0~32) MPa (in case of other high pressure, it must be of special order)
(IV) Medium temperature :-50°C~ +350°C,
measurement accuracy :±1°C
(V) Environment temperature : -20°C ~ +70°C
(VI) Measurement medium: liquid, gas, solid, or two phases and three phases mixed fluid
(VII) Output signal:
(1) 4-20mA current signal of flow, with load resistance ≤500Ω
(2) 0-10KHz frequency signal of flow.
(3) RS485 Communication protocol
(4) Hart protocol
(VIII) Power supply voltage: 24VDC
(IX) Measurement of measuring pipe: 316L stainless steel
(X) Response time: 0.1s~5s, adjustable
(XI) Explosion-proof grade: Ex(ib)II BT2-T5
II. Flow Range
Micro Flow Meter ----- GV-DMF-1-1-A, GV-DMF-1-1-B, GV-DMF-1-2-A, GV-DMF-1-2-B
Model | DN | Measurement scope(kg/h) | Work Pressure (MPa) | Connection type (mm) |
DMF-1-1-AB | 1.5 | 0~4 | 0~32 | Weld Joints Φ6×1.5 |
DMF-1-1-A | 3 | 0~40 | 0~32 | Weld Joints Φ6×1.5 |
DMF-1-1-B | 6 | 0~100 | 0~25 | Weld Joints Φ10×2 |
DMF-1-2-A | 8 | 0~200 | 0~20 | Weld Joints Φ10×1 |
Medium-Small Flow Meter ---- GV-DMF-1-3-A, GV-DMF-1-3-B, GV-DMF-1-4
Model | DN | Measurement scope (kg/h) | Work Pressure (MPa) | Connection Type(mm) |
DMF-1-3-A | 12 | 0~500 | 0~4 | Weld Joints Φ18×3 |
12 | 0~500 | 0~25 | Weld Joints Φ20×4 | |
DMF-1-3-B | 14 | 0~1000 | 0~4 | Weld Joints Φ18×2 |
14 | 0~1000 | 0~25 | Weld Joints Φ20×3 | |
DMF-1-4 | 16 | 0~3000 | 0~4 | Weld Joints Φ18×1 |
16 | 0~3000 | 0~25 | Weld Joints Φ20×2 |
Large-scale Flow Meter--- GV-DMF-1-5, GV-DMF-1-6-A, GV- DMF-1-6-B, GV-DMF-1-6-C, DMF-1-6-D
Model | DN | Measurement scope (t/h) | Work Pressure (MPa) | Connection Type(mm) |
DMF-1-5-A | 25 | 0.5~5,1~10 | 0~4 | Flange 25 |
DMF-1-5-B | 40 | 1~10,2~20 | 0~4 | Flange 40 |
DMF-1-6-A | 50 | 1.5~15,3~30 | 0~4 | Flange 50 |
DMF-1-6-B | 80 | 6~60,10~100 | 0~4 | Flange 80 |
DMF-1-6-C | 100 | 12~120,15~150 | 0~4 | Flange 100 |
DMF-1-6-D | 150 | 36~360,50~500 | 0~2 | Flange 150 |
If you need more information ,pls kindly contact with me !