Antistatic white teflon rod:
Characteristics: PTFE rod including extrusion rod and moulding rod, diameter from 4mm to 200mm is made by extruding method with PTFE granular resin; the diameter over 220mm are manufactured by molding method.
Application:
- Slide bearings
- Lubricant working
- Piston Rings, glide rings, lantern rings and back up rings
- Bearings in chemical pumps
- Envelope Gaskets
- Bellows
- Electrical and thermal insulators
Technical data:
Item | Unit | Result |
Apparent density | g/cm3 | 2.10~2.30 |
flexural strength | Mpa | 11-14 |
Tensile strength | MPa | ≥150 |
Friction coefficient | / | 0.04 |
Voltage | KV/mm | 10 |
About our factory:
-> Our factory is located in Zhejiang-Deqing Economic Development Zone which has convenient transportation and elegant surrounding. You are warmly welcome to visit our factory.
-> We are a Professional PTFE manufacturer.
-> We specialize in PTFE which include sheet, bar, tube, tape, film, gasket, bridge sliding blocks, braided packing and all special type components. We can meet your special demand.