High Frequency Vacuum Wood Dryer, Patented Design ( Model No.GZ-3.0III-DX)
GZ-3.0-III-DX HIGH FREQUENCY-VACUUM WOOD DRYER is a new generation wood drying equipment. This machine is the result of design combining high frequency medium heating technology and vacuum cryogenic dehydration technology, greatly reduced drying time. This equipment adopts PLC programming control, drying chamber equipped with 80mm thick thermal insulating layer and inside & outside two sets stainless steel condensation system, it is more convenient to choose lumber drying procedure and applicable for drying all kinds of wood. The main control valve adopts pneumatic valve technology, this technology have advantages like steady, long serve life and low failure rate. The main advantage of our wood drying equipment: short drying cycle, super quality, cost effective and eco-friendly.
Advantages of high frequency vacuum wood dryer:
Quick heating--- It does not require heat conduction, inside and outside of wood timber is heated at same time;
Fast dehydration ---During the heating process, there is staged temprature difference between inside and outside of wood timber this will speed up the water movement from inside wood to outside wood
High quality--- there will be no crackings ,bending and color change by taking control of heatiing speed,relative vacuum degree & condensing rate.
Strong adaptability---High frequency-Vacuum drying can realize not only cold drying but hot drying, help to eliminate stress,solidify resin. This applies to dry all kinds of wood
High-usage--- Square designed drying box supplies more space utilization. it is suitbale for different shaped wood
Cost saving --- Fast tempreture raise and higher sapce utilization takes lower cost than traditional ways.
Eco-friendly --- This machine does not pollute the enviroment
Full-automatic ---UA Unattended Automatic drying process,very easy to handle
Specification of high frequency vacuum wood dryer:
operating principle: HF medium heating plus vacuum dewatering
Size: 4330*1716*1806mm
Power input: 10 kw
Drying medium: direct heating
Heating mode: electrical medium
Application: drying all kinds of wood
Temperature range: subject to request
Water evaporation: 90kg/24hours (according to follow conditions: high frequency power 10KW, vacuum degree -0.08,condensing temperature 25 °C)
Types: manual, automatic
Capacity: 3 m3, (optional: 4 m3, 6 m3, 8 m3, 10 m3 )
Model | Power | Effective Volume | Applications | Max Length of Wood | Outer Size |
GZ-3.0III-DX | 10KW | 3m3 | all kinds of wood | 3m | 4330*1716*1806mm |
GZ-4.0III-DX | 10KW | 4m3 | all kinds of wood | 4m | 5330*1716*1806mm |
GZ-6.0III-DX | 20KW | 6m3 | all kinds of wood | 5m | 6465*1916*2006mm |
GZ-8.0III-DX | 30KW | 8m3 | all kinds of wood | 6m | 7605*2016*2006mm |
GZ-10.0III-DX | 40KW | 10m3 | all kinds of wood | 6m | 7605*2116*2106mm |
1.Vacuum Drying Kiln
2.High frequency generator
3.Workshop
4.Storage packed
5.Exhibition