High COP Air source R410A swimming pool heat pump/SPA Heat Equipment 

DSP-120HA

 Swimming Pool Heat Pump is one of the most economical systems to heat the swimming pool efficiently. Using the free renewable energy from the air and the earth it delivers up to five times more energy in heating than a traditional heating system such as gas boiler or electric heater. So you will save 4/5 cost of the traditional heating. The unit is working at low running costs, no direct CO2 emission and are able to be integrated with energy systems like solar and boiler. Swimming pool heat pump lengthens your swimming season and gives you comfort at high level. You could enjoy swimming not only in summer, but also in spring, autumn and even winter time.

Ecological and economical heating

By making use of the renewable energy in the outside air, it consumes much less energy with low carbon emission. Use environment friendly advanced refrigerant R410A which has no effect on Ozone.

Titanium heat exchanger

Advanced titanium heat exchanger guarantees long life span of heat pump free from corrosion and rust. By using titanium heat exchanger DAISHIBA pool heat pump could be applied with all types of water treatment such as chlorinate, iodine, bromine and salt water.

Multiple functions

Cooling & heating function available; DASHIBA heat pump could heat your pool as well as cool the pool.

Reliable operation

To guarantee the stable running and increase the durability of the unit multiple protection devices have been set into DAISHIBA pool heat pump which include insufficient water flow protection, high/low pressure protection, overload protection, compressor protection.

Safe use

Swimming pool heat pump works without oil: gas or other hazardous substance which avoid potential risk that goes together. Moreover no gas connection or a fuel tank is needed. No risk of intoxication, smell or pollution from leakage.

Easy installation

Swimming pool heat pump is easy to be installed with simple electrical and hydraulic connection. the cost of installation. The cost of installation is relatively low.

Self-diagnosis

When there is malfunction DAISHIBA Pool heat pump will make self diagnosis by displaying error code from the control panel. The problem could be found out at a glance.

Wide application

Swimming pool heat pump could ideally suit the pools from 15 to 350m3

Wide range

Models available 4.5kw, 6.5kw, 8.5kw,10kw, 12kw, 18kw, 23kw,45kw,50kw,80kw,100kw and so on.

Specification - Swimming Pool Heat Pump( DSP-120HCA )

Capacities and power inputs based on the following conditions:                                                                                                                         -   Heating:  Outlet water temperature 27°C. Ambient air temperature 24°C (DB)/19°C(WB)                                                                                                                                   -   Cooling:  Outlet water temperature 27°C. Ambient air temperature 35°C (DB)/27°C (WB)

PRODUCTION PROCESS of Swimming Pool Heat Pump

1)   Base plates go online

2)   Install compressors, condensers and evaporators

3)   Assemble and weld copper pipes

4)   Recharged with Nitrogen

5)   Water-inspection (Check if exist in air leakage)

6)   Discharge Nitrogen

7)   Vacuum air-removed

8)   Add refrigerant

9)   Halogen inspection

10)        Fix fan component

11)        Install electrical control

12)        Security checks (Insulation, Ground connection, Dielectric Strength test, Leakage)

13)        Run commodity inspection (The noise of components and parts, Function, Timing, shutdown, current, Difference in temperature)

14)        Stick nameplate and connection diagram

15)        Document attached (Product Manuals, instructions)

16)        Final inspection (Appearance parts)

17)        Packing

18)        Tape-out

Details of SPA heat pump