Click to enlarge
SAE4140 4150 Alloy steel bar
1.Grade: SAE4140 4150 42CrMo4 50CrMo4 A193 B16
2.Dia:12-300mm
3.Length:5.5-12m
4.Hot rolling
5.MOQ:20tons
6.Chemical Composition
Grade | C | Si | Mn | Cr | Mo | Ni | Cu
| P | S | |
4140 | 0.38 0.41 | 0.15 0.35 | 0.85 1.00 | 0.8 1.1 | 0.15 0.25 | Max 0.25
| Max 0.35 | Max 0.015 | Max 0.040 | Al (0.012 0.0030) |
4150 | 0.48 0.53 | 0.15 0.35 | 0.75 1.00 | 0.80 1.10 | 0.15 0.25 | Max 0.25
| Max 0.35
| Max 0.035
| Max 0..040
| V (0.012 0.030) |
7.Mechanical Property
Grade | Tensile Strength (MPa) | Yield Strength δ5 (%) | Area Reduction ψ (%) | Impact Work Akv (J) | Notched Bar impact Strength αkv (J/cm2) | Hardness | Sample Size |
4140 | Min1080 (110) | Min12 | Min45 | Min63 | Min78(8) | Max217HB | 25mm |
8.Size Tolerance
Length tolerance: +100mm/-0mm
Side length tolerance: +/-2mm
Straightness: max 6mm/m
9.Both end of each bar must be cut.
Ladle furnaced and vacuum de-gassed
Show Heat NO. on each bar
Surface condition: The surface of the hot rolled round/ square bar shall be free cracks, scar and wrinkles at affect the use of the billets. In case there is the above-mentioned defect.it shall be remove.
The mill test certificate shall show the chemical composition, and it is guaranteed that the chemical composition shall be within the limit stipulated in the contract.