Applicable Fibers

SM(ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
and other single mode fiber including ITU-T G.657 fiber

Fiber count

Single

Applicable fiber dimensions

Cladding Diameter: 80μm to150μm
Coating Diameter:100μm to 1,000μm

Fiber setting and cleaved length

Sheathe clamp A (standard) : For coating dia. up to 250um (8 to 16mm cleave),
coating dia. Of over 250um (16um cleaver)
Sheathe clamp B (option) :For coating dia. up to 1000um (8 to 16mm cleave)
Sheathe clamp C (option) :For 900um dia. Loose tube fiber (8 to 16mm cleave)
Fiber holder (option) :FH-60-250 and FH-60-900 (10mm cleaver)

Splicing Modes

100 preset and user programmable modes

Typical Average Splice Loss

0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS
(Measured by cut-back method relevant to ITU-T and IEC standards)

Return loss

>60dB

Splicing Time

Typical 9 sec. with SM FAST, 10sec. with SM AUTO and 13sec with AUTO
 modes with standard SM (ITU-T G.652)

Splice Loss Estimate

Available

Attenuation splicer function

Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an
 in-line fixed attenuator

Tube heater / Heating Time

Built-in tube heater with 30 heating modes.Typical 30 seconds with FP-03 sleeve,

Applicable Protection Sleeve

60mm, 40mm and Fujikura FPS01 series.

Storage of Splice Result

The last 2000 results to be stored in internal memory

Tension Test

1.96 to 2.25N

Operating Condition

0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 degC and up to  15m/s wind velocity, respectively

Storage Condition

0 to 95%RH and -40 to 80 degC respectively.
Battery:-20 to 30 degC for long term

Dimensions

136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)

Weight

2.3 kg (5.1 lbs) with AC adapter ADC-13; 2.7kg with BTR-08

Viewing Method

Two CMOS cameras and 4.1 inch TFT color LCD monitor

Fiber view and
Magnification

300X for single X or Y view, or 187X for X and Y view

Power Supply

Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery

No.of Splice Cycles with battery

Typical 160 cycles (splice / tube heat) with BTR-08

Electrode life

2500 arc-discharges

Terminals

USB 1.1 (Mini-B type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02/03 or SH-8 power supply

DESCRIPTION

PART #

Cleavers

CT-30A Cleaver

S014080

Fiber Holders (pairs)

FH-60-250 Fiber Holder

S014548

FH-60-900 Fiber Holder

S014549

Batteries and Power Cords

ADC-13 AC Adapter

S014535

BTR-08 Battery
(160 splice/heat cycles)

S014540

DCC-14 Power Cord
(connects ADC-13 to BTR-08)

S014541

DCC-12 Power Cord
(connects ADC-13 to cigarette lighter socket)

S013552

DCC-13 Power Cord
(connects ADC-13 to power source via alligator clips)

S013556

Miscellaneous

ELCT2-20A Electrodes

S013532

ASW-02 Splicing Workstation

S010532

JP-05 Splice Sleeve Cooling Tray

S014537

CLAMP-S60A Sheath Clamp
(8mm min. cleave for 250um, 16mm min. cleave for 900um)

S014550

CLAMP-S60B Sheath Clamp
(8mm min. cleave for 250um and 900um)

S014551

CLAMP-S60 Sheath Clamp (for 900um loose tube fiber)

S014552

CC-24-60S Transit Case (fits only FSM-60S)

S014559

One Year Extended Warranty

S012996

Two Year Extended Warranty

S013000