Length: 270 ft
Breadth: 80 ft
Depth: 16 ft
Designed: 7 Tons / M2
Classification: Germanischer Llyod
 
No of W.T longitudinal bulkheads: 3
No of W.T transverse bulkheads: 8

Plate Thickness
Main Deck: 12.0 mm
Bottom: 12.0 mm
Side shell: 12.0 mm
Transom / head log: 12.0 mm
Bulkheads: 8.0 mm
Center bulkheads: 8.0 mm
 
Webs
Flanged plates of 8 mm thick at (6) ft apart with sizes subject to class approval.
Main deck: 19” + 5” x 8 mm
Bottom: 19” + 5” x 8 mm
Side shell: 18” + 4” x 8 mm
Longitudinal bulkhead: 16” + 4” x 8 mm
Transverse bulkhead: 19” + 5” x 8 mm
 
Stiffeners
Unequal angles of sizes (subject to class approval)
Deck: 125 mm x 75 mm x 10 mm
Bottom: 125 mm x 75 mm x 9 mm
Side shell: 125 mm x 75 mm x 9 mm
Transverse bulkhead: 125 mm x 75 mm x 7 mm
Longitudinal bulkhead: 125 mm x 75 mm x 7 mm
 
Pillars
Vertical: 200 mm x 200 mm I beams
Diagonal: 150 mm x 150 mm I beams
FWD / AFT Diagonal: 150 mm x 150 mm Angle bar
 
Round Bar
50 mm dia round bar
 
Deck Fittings
The barge will be provided with the following accessories:
 
Winch and anchor
One unit 10 tons engine operated winch complete with one unit of 800Kgs stockless anchor
 
Navigation light stand
3 nos of steel navigation light stand to be welded on deck
 
Zinc Anodes
Sufficient units to be welded for protection on external hull
 
Tyre fenders
Sufficient lorry tyre fender around the barge and secured to chain and shackle to welded pad eyes on deck edge
 
Steel Fender 
9mm x 125 x 75 angle bar doubler to be welded round the side shell deck edge
 
Double bollard
8 sets of double bollard, 4 nos ranged on each side of the barge
 
Manholes
1 piece per tank, comes with steel bolts and stainless steel nuts, non-flushed type
 
Towing Bracket
1 set to be welded at forward deck
 
Hull marking
Draft marks, ship name, plimsoll marks shall be cut and welded on the hull
 
Sideboard 
Fitted on each side up to 10 ft height x 8 mm thickness steel plate complete with spaced I beam stanchions
 
Ramp Door
15 feet x 30 feet H beam with complete sets.

Surface Preparation and Corrosion Prevention
Upon completion of fabrication at the yard, the external surface shall be blasted to SA 2 standard and paint applied as follows: 
One coat Hempadur brown
One coat Hempadur black
One coat A/F Classic (for bottom to lightship waterline)